Strato X User Manual - Image Works

More documents

Recommendations

Info

USER'S MANUAL General instructions for use 6.7.2.1 Bite block preparing: Maxilla Implant 1. Remove the standards bite block and insert the special implant bite block for maxilla (main characteristics: cannot be inclined). 2. Insert the plastic bite, after its cold disinfecting, in the bite block base (please refer to item 3 in Figure 32. 3. Take care that the plastic bite is on the lower position, in order to assure that the area of interest will be irradiated (please refer to Figure 32) To do this, unscrew the stopping mechanism using the knob 1, place the bite 2 in the lowest position and fix the position using the knob 1, in order to hold the bite in the correct position during the examination. Legend: 1 - Knob 2 - Bite 3 - Base Figure 32 (Rev. 1) 89 STRATO X (120V)
USER'S MANUAL General instructions for use 6.7.2.2 Bite block preparing: Mandible Implant As already stated, this kind of examination has to be performed having the patient’s head inclined in order to maintain the mandible border in the point of interest most horizontal as possible; in this way radiographs will be of better quality and with all clinical interesting points. 1. Remove the standards bite block and insert the special implant bite block for mandible (main characteristics: can be inclined). 2. Insert the plastic bite, after its cold disaffection, in the bite block base (please refer to item 5 in Figure 33). 3. Select the correct angle; according to the patient’s morphology: it must be evaluated case by case. As suggestion, for all teeth it advised to use the lower angle (refer to Figure 33A). It is possible, however for some patient, depending on his morphology that the higher angle has to be used. (please refer to Figure 33C) for posterior teeth. To do this, referring to Figure 33B: • unscrew the stopping mechanism using the knob 3 • place the bite block support 4 on the chosen angle • hold the bite support on the position using the knob 3, in order to hold the correct position during the examination. NOTE: We suggest to use, as a reference to check the horizontality of the mandibular border, the laser beam normally used for the Frankfurt plane. Then choose the correct angle. 4. Take care that the plastic bite is on the higher position, in order to assure that the area of interest will be irradiated (please refer to the Figure 33A). To do this, unscrew the stopping mechanism using the knob 1, place the bite 2 in the highest position and fix the position using the knob 1, in order to hold the bite in the correct position during the examination. Legend: 1 - Knob used to fix the bite 2 - Bite 3 - Knob to fix the angulation 4 - Bite block 5 - Base Figure 33 STRATO X (120V) 90 (Rev. 1)
Page 1 and 2:
STRATO X 0434 (120V version) User's
Page 3 and 4:
USER'S MANUAL Revision history THIS
Page 5 and 6:
USER'S MANUAL Contents 6.5 TMJ exam
Page 7 and 8:
USER'S MANUAL Contents THIS PAGE IS
Page 9 and 10:
USER'S MANUAL Safety information 2.
Page 11 and 12:
USER'S MANUAL Safety information Th
Page 13 and 14:
USER'S MANUAL Safety information 2.
Page 15 and 16:
USER'S MANUAL Cleaning and disinfec
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
USER'S MANUAL Technical specificati
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
USER'S MANUAL General instructions
Page 41 and 42:
Page 43 and 44:
Page 45 and 46: USER'S MANUAL General instructions
Page 95: USER'S MANUAL General instructions
Page 147 and 148:
Page 149 and 150:
USER'S MANUAL Maintenance MAINTENAN
show all

Strato X User Manual - Image Works

Create successful ePaper yourself

Delete template?

Save as template?