Strato X User Manual - Image Works

USER'S MANUAL
General instructions for use
6.8.2.2 Manual exposure
If the kV, mA and s combinations of the above table are not considered
suitable for a specific examination, it will be possible to set new
parameters using the manual mode.
To change the kV or mA values, press key "7" , or key "5" .
The LED on the Patient Size key switches off and the Adult / Child and
Cephalometry keys will flash. One of the following messages will be
displayed:
8 x 1 0 A S T F = 0 8 . 3
> 7 0 k V 1 0 m A 0 . 8 0 s
8 x 1 0 A S T F = 0 8 . 3
7 0 k V > 1 0 m A 0 . 8 0 s
8 x 1 0 A S T F = 0 8 . 3
7 0 k V 1 0 m A > 0 . 8 0 s
The symbol ">" indicates which parameter is being changed.
The selected parameter can be changed using the increase key "3"
and decrease key "6" .
The "kV" value can vary between 60 and 80 kV, with 2 kV steps.
The "mA" value can vary between 4 and 12 mA, with 1 mA steps.
The "s" value can vary between 0.20 s and 3.00 s as per the following
table:
Exposure times selectable in manual mode
0,20 - 0,23 - 0,26 - 0,30 - 0,33 - 0,36 - 0,40 - 0,45 - 0,50 - 0,60
- 0,70 - 0,80- 0,90- 1,00 - 1,30- 1,60 - 2,00 - 3,00
Table 7
NOTE:
To change the values rapidly, keep the increase key "3"
decrease key "6"
pressed.
or
STRATO X (120V) 110
(Rev. 1)