Strato X User Manual - Image Works

USER'S MANUAL
General instructions for use
NOTE:
If, during the exposure the patient moves or the unit collides with the
patient or with another structure, or the operator realises that the
parameters set are incorrect, the X-ray button "30" must be released
immediately, thus suspending emission of the X-rays and the movement
of the arm.
If this occurs, the following message will be displayed:
E 5 6 1
P R E S S R E S E T
All the motors will be switched off and it will be possible, if necessary, to
manually rotate the arm and allow the patient to move away from the
unit. It is recommended that this movement be made with great care
in order to prevent damage to the machine.
Press button "9"
. The following message will be displayed:
M A C H I N E S E T T I N G
Press key "23"
. The following message will be displayed:
W A I T F O R
M A C H I N E S E T T I N G
And then:
R E P L A C E
C A S S E T T E
The system now returns to its initial position and the unit must be reset
(cassette and parameters) and the patient can be repositioned.
NOTE:
Remove the cassette and change the film to prevent a double exposure of
the film that would then provide non-diagnostic results.
NOTE:
As opposed to Panoramic exposure, the Biaxial TMJ examination is a
non-continuous exposure. There is a pause between each exposure
during which the machine positions itself for the next X-ray.
(Rev. 1)
75
STRATO X (120V)