Strato X User Manual - Image Works

USER'S MANUAL
General instructions for use
6.7.3 Equipment preparation
To select the IMPLANT mode, press button "14" .
The equipment will configure itself on the following configuration:
• ADULT, with the LED of the upper part of button "11" lighted on
• MEDIUM SIZE, with the LED of the upper part of button "12" lighted
on
• MEDIUM ARCH with the LED of the upper part of button "13" lighted
on
• IMPLANT with the LED of the upper part of button "14" lighted on
and with the LED "23" lighted on and the following message on the
display. For reduced examination:
T O O T H : 1 4
■ ■ ( 2 )
Another pressure of button "14"
will select "Complete mode".
T O O T H : 1 4
■ ■ ■ ■ ( 4 )
After this selection, the procedure has to be completed with the
positioning of the implant bite block, in case of its removal from the
support; the implant bite block has to be chosen according to the maxilla
or mandible examination.
NOTE:
Before use, it is mandatory to perform a cold disinfecting of the plastic
bite using a, for instance, a 2% water solution of Glutaraldehydes
according to the instruction for use specified by its manufacturer.
NOTE:
CHILD selection cannot be performed.
(Rev. 1)
91
STRATO X (120V)