Strato X User Manual - Image Works

USER'S MANUAL
General instructions for use
6.12.2 Soft tissue filter
It is possible to set the default value of the Soft Tissue Filter in function
of patient type (Adult/child) and the patient size (small, medium, large).
NOTE:
The value of Soft Tissue Filter is stored for all Asymmetric projections.
For the symmetrical projections instead, the default position of the STF is
out (the display shows OUT).
6.12.3 Storing parameters
To store the set value, press the key "28" e "23" , at the
same time, the display will show the following message:
U P D A T E C H A N G E S ?
E N T E R = Y R E S E T = N
press key "23"
to confirm, the LED's will lit again, or the key
"9" to cancel the setting; in this case the LED's blink and the
display still shows the same value.
(Rev. 1)
139
STRATO X (120V)