Strato X User Manual - Image Works

USER'S MANUAL
General instructions for use
3. With key "22" or key "25" it is possible to select the
size of the cassette and the type of projection (see the Table 6 at the
beginning of the chapter).
NOTE:
Exposure cannot be made if a cassette has not been inserted.
NOTE:
If the presence of a cassette is detected the system will ask for its
replacement before the exposure.
It is possible to erase this request, if the cassette had been replaced
earlier, by pressing key "9" .
NOTE:
The system does not detect if the film has already been exposed; if the
cassette has been removed, but the film has not been replaced the
exposure will be allowed, but the result will not be significant from the
diagnostic point of view.
(Rev. 1)
107
STRATO X (120V)