Strato X User Manual - Image Works

USER'S MANUAL
General instructions for use
6.8.2 Anatomic / Manual exposure
NOTE:
If the previous examination had been made manually, press key
"15" to change to anatomic exposure.
After having set the machine accordingly, the following two operating
modes may be selected:
• ANATOMIC: with the kV, mA and s values programmed according to
the type of patient and size
• MANUAL: with the possibility of changing the kV, mA and s values
set.
NOTE:
In manual condition, the LED on the CEPHALOMETRY function
key "15"
, and the Adult / Child led "11" flash so that the type of
patient may be selected. Press key "11"
to change the selection.
STRATO X (120V) 108
(Rev. 1)