BC-3500 Series - Rowe International

BC-3500 Bill and Coin Changer
CONNECT THE POWER SUPPLY WIRES TO
THE INTERNAL MACHINE WIRES PER
THE WIRING DIAGRAM IN SECTION 4
OF THIS MANUAL USING STANDARD U.L.
LISTED PRESSURE CABLE CONNECTORS
(SUCH AS WIRE NUTS).
JUNCTION BOX
AFTER REMOVING THE LINE
CORD AND STRAIN RELIEF,
ENLARGE THE HOLE WITH A
7/8" DIA. CHASSIS PUNCH
CONDUIT
CONNECTOR
CABINET RACK
EARTH GROUND
(GREEN/YELLOW OR GREEN WIRE)
Figure 2-1. Installing a 1/2-Inch Conduit
LEAD ANCHORS
Mounting Detail - Wood Frame Wall
LAG
SCREW
NOTE:
BE SURE THAT THE LAG SCREWS USED
FOR ATTACHMENT ARE AT LEAST 3/8"
DIA., AND, FOR WOOD RAME WALLS,
ARE ATTACHED DIRECTLY TO THE WALL
STUDS.
Mounting Detail - Masonry Wall
CHANGER
STUD
LAG
SCREW
& WASHER
CONCRETE
WALL
LEAD
ANCHOR
& LAG
SCREW
Figure 2-2. Attaching the BC-3500 to a Wall
2-2 25238801