BC-3500 Series - Rowe International

BC-3500 Bill and Coin Changer
Adjusting the Bill Acceptor Rails
The bill acceptor mounting rails must be spaced correctly as shown in Figure 3-10A. The bill acceptor should slide
in and out without binding, but not be sloppy in the rails.
1. Adjust the rail spacing by loosening the two screws (A) which hold the right-hand rail and move the rail (B)
sideways.
2. Retighten the screws.
A
B
Hold the transport flush
to the inlet trim.
Figure 3-10A. Bill Acceptor Rail Adjustment
3-12 25238801