BC-3500 Series - Rowe International

Section 4: Troubleshooting
REJECT - VT AGAIN
Symptom:
The transmissive cell was covered.
This is a reject message.
A bill was rejected because the VT cell recovered while the bill changer was in the process of validating a bill.
If bills are rejected frequently with this message, check for a piece of paper or other material in the transport.
The VT cell may be giving an intermittent signal.
Corrective Action:
1. Check the VT cell for proper switching. If the cell is OK, check the wiring from the VT cell to the CCC (P4 -
Pin 10) for an intermittent open connection.
2. If all of the preceding checks are OK, replace the CCC.
If the bill is left in the transport for more than five seconds, the bill changer will go into SELF-CLEAR.
25238801 4-11