5-speed manual gearbox 0A4.pdf

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
5-speed manual gearbox 0A4 - Edition 04.2010
❑ Installation position ⇒ page 137
7.4 Removing and installing gearbox housing and selector mechanism
1 - Countersunk bolt, 25 Nm
2 - Flange shaft with compression
spring
❑ Removing and installing
⇒ page 187
❑ Assembling
⇒ page 196
3 - Torx socket head bolt, 25
Nm
❑ For reverse shaft support
❑ Self-locking
❑ Always renew
4 - Torx socket head bolt, 30
Nm
❑ For reverse shaft support
❑ Self-locking
❑ Always renew
5 - O-ring
❑ Always renew
6 - Pivot pin
7 - Bolt, 25 Nm
8 - Bolt, 25 Nm
9 - Cover plate
10 - Multi-point socket head
bolt 25 Nm
❑ For reverse shaft support
❑ Always renew
11 - Bolt, 5 Nm
12 - Gearbox neutral position sender -G701-
❑ for vehicles with start/stop system
13 - Gearbox housing
❑ Pull off together with 5th gear ⇒ page 126
❑ Repairing ⇒ page 141 .
14 - Clutch housing
❑ Repairing ⇒ page 141 .
15 - Hexagon bolt, 25 Nm and turn 90° further
❑ Always renew
16 - Selector shaft with selector shaft cover
❑ (Selector unit)
❑ Repairing ⇒ page 147 .
17 - Multi-point socket head bolt 25 Nm
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does not guarantee or accept any liability with respect to the correctness of information
in this document. Copyright by Volkswagen AG.
118 Rep. Gr.34 - Controls, housing