5-speed manual gearbox 0A4.pdf
5-speed manual gearbox 0A4.pdf
5-speed manual gearbox 0A4.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does not guarantee or accept any liability with respect to the correctness of information<br />
in this document. Copyright by Volkswagen AG.<br />
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤<br />
5-<strong>speed</strong> <strong>manual</strong> <strong>gearbox</strong> 0A4 - Edition 04.2010<br />
Continuation for all<br />
Note<br />
♦ During the following work, ensure that no brake fluid lands on<br />
longitudinal member or <strong>gearbox</strong>. If this does happen, clean the<br />
affected areas thoroughly.<br />
♦ Lay a lint-free cloth under master cylinder.<br />
– Clamp off supply hose to master cylinder with hose clamps up<br />
to ∅ 25 mm -3094- .<br />
– If present, loosen spring-type clip -3- with hose clip pliers -VAS<br />
6362- and pull supply hose off master cylinder.<br />
– In addition, for disconnecting, you can close it with the sealing<br />
tool -T10249/1- (⇒ figure above).<br />
– Release securing clip -2- using screwdriver or a pointed object<br />
and pull pipe/hose line or plastic line -1- off master cylinder.<br />
– Unclip clutch position sender -G476- from master cylinder<br />
-arrow- and remove with electrical connector attached -4-.<br />
Note<br />
When performing work in the footwell, put cloths on the carpet to<br />
protect it from possible brake fluid spills.<br />
– Remove trim and cover below trim on drive side ⇒ General<br />
body repairs, interior; Rep. Gr. 68 .<br />
Vehicles with knee airbag<br />
Note<br />
The installation location of the knee airbag is above the pedal<br />
cluster.<br />
2. Repairing clutch mechanism 27
Change language