5-speed manual gearbox 0A4.pdf
5-speed manual gearbox 0A4.pdf
5-speed manual gearbox 0A4.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
– Bend open tabs -arrows- of selector mechanism cover using<br />
a screwdriver and remove cover.<br />
– Remove gasket.<br />
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤<br />
5-<strong>speed</strong> <strong>manual</strong> <strong>gearbox</strong> 0A4 - Edition 04.2010<br />
– Pull off securing clips -2 and 3-. Securing clips -1 and 4- are<br />
no longer present. Prise gear selector cable off gear lever and<br />
gate selector cable off gate selector lever with e.g. a screwdriver<br />
if necessary.<br />
– Pull gear selector cable and gate selector cable from selector<br />
housing.<br />
Release locks -A- for gear and gate selector cables -B- as follows:<br />
♦ Push sliding sleeve forward to stop -arrow 1-.<br />
♦ Turn sliding sleeve to right to stop -arrow 2- until it engages.<br />
– Remove locking mechanism from Bowden cables.<br />
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does not guarantee or accept any liability with respect to the correctness of information<br />
in this document. Copyright by Volkswagen AG.<br />
– Pull off securing clips -1- and -2-.<br />
– Remove cable support bracket from Bowden cables.<br />
2.10.2 Installing<br />
Install in the reverse order of removal, observing the following:<br />
2. Repairing selector mechanism 79
Change language