5-speed manual gearbox 0A4.pdf

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
5-speed manual gearbox 0A4 - Edition 04.2010
2.3 Removing and installing selector lever knob and cover
1 - Emblem
❑ Can be carefully levered
off gear knob of plastic
or leather
2 - Gear knob
❑ With gaiter
❑ Gear knob and gaiter
cannot be separated
from one another
❑ Always renew together
❑ Removing and installing
⇒ page 61
3 - Clamp
❑ For securing gear knob
to gear lever
❑ Secure to gear knob
⇒ Item 2 (page 61) using
hose clip pliers -V.A.G
1275-
❑ Always renew
4 - Centre console cover
❑ In some equipment versions,
forms one part together
with centre console
5 - Noise insulation
❑ Not fitted in all vehicles
❑ Arrow on noise insulation
points in direction of
travel
❑ Locking lugs are arranged
at varying intervals
❑ Therefore it can be installed in only one position
2.4 Removing and installing gaiter with gear
knob and noise insulation
Carry out procedure as follows:
– Pull or carefully prise gaiter with centre console cover upwards
out of centre console -arrows-.
Note
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does not guarantee or accept any liability with respect to the correctness of information
in this document. Copyright by Volkswagen AG.
With some equipment variations, the gaiter must be levered off
along the front section.
2. Repairing selector mechanism 61