5-speed manual gearbox 0A4.pdf

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
5-speed manual gearbox 0A4 - Edition 04.2010
2.7 Assembly overview - removing and installing selector cables
Note
Lubricate bearing positions and sliding surfaces. Allocate grease according to ⇒ Electronic parts catalogue
“ETKA” .
1 - Gear selector cable
❑ Connect to cable endpiece
⇒ Item 11 (page 71)
❑ Installation position
⇒ page 58
❑ Use cable tie to fix onto
gate selector cable
⇒ page 73
❑ Removing and installing
⇒ page 78
❑ From 11.06, modified
attachment to gear lever
inside selector mechanism
⇒ Item 8 (page 65)
2 - Gate selector cable
❑ Connect to cable endpiece
⇒ Item 10 (page 71)
❑ Installation position
⇒ page 58
❑ Use cable tie to fix onto
gear selector cable
⇒ page 73
❑ Removing and installing
⇒ page 78
❑ From 11.06, modified
attachment to gate selector
lever inside selector
mechanism
⇒ Item 6 (page 65)
3 - Securing clip
❑ Always renew
❑ Discontinued in selector
mechanisms from 11.06 ⇒ page 65
4 - Selector lever housing
5 - Securing clip
❑ Always renew
❑ Do not damage cables when removing
6 - Hexagon bolt, 20 Nm
❑ Qty. 3
❑ For cable support bracket
7 - Cable support bracket
❑ May be made from plastic or metal
8 - Grommet
❑ Cable support bracket mounting on gearbox
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted unless authorised by Volkswagen AG. Volkswagen AG does not guarantee or accept any liability with respect to the correctness of information
in this document. Copyright by Volkswagen AG.
70 Rep. Gr.34 - Controls, housing