ATTP 5-0.1 Commander and Staff Officer Guide - Army Electronic ...

Sustainment Annex Format and Instructions
[CLASSIFICATION]
ANNEX F (SUSTAINMENT) TO OPERATION PLAN/ORDER [number] [(code name)]—[issuing
headquarters] [(classification of title)]
(d) (U) Field Maintenance. Identify, list, and describe the recovery plan and types of recovery
vehicles available; Class IX parts support; the locations of maintenance collection points; logistics civil
augmentation program (LOGCAP) capabilities and availability; and field maintenance support
relationships at each phase of the operation.
(e) (U) Sustainment Maintenance. Identify, list, and describe the location of sustainment
maintenance units and services; the locations of maintenance collection points; the LOGCAP capabilities
and availability; and sustainment maintenance support relationships at each phase of the operation.
(2) (U) Transportation. Provide transportation information for each subparagraph. Identify facility
locations, traffic control, regulation measures, main supply routes, alternate supply routes, transportation
critical shortages, and other essential transportation data not provided elsewhere. Post main supply routes,
alternate supply routes, and transportation facilities to the logistics synchronization matrix and the overlay
at Tab A (Sustainment Overlay) to Appendix 1 (Logistics) to Annex F (Sustainment). Identify and list
transportation request procedures. Refer to Tab C (Transportation) to Appendix 1 (Logistics) to Annex F
(Sustainment) as required.
(a) (U) Ground. Identify the proper procedures to request ground transportation.
(b) (U) Sea/River/Water. Identify the proper procedures to request sea, river, and water
transportation.
(c) (U) Air. Identify the proper procedures to request air transportation.
(d) (U) Container Management. Describe the container management plan.
(3) (U) Supply. Provide information by class of supply in each subparagraph. Identify and list
maps, water, special supplies, and excess and salvage materiel, as applicable. For each subparagraph, list
supply point locations and state supply plan and procedures. Post supply points and facilities to the logistics
synchronization matrix and the overlay at Tab A (Sustainment Overlay) to Appendix 1 (Logistics) to Annex
F (Sustainment). Refer to Tab D (Supply) to Appendix 1 (Logistics) to Annex F (Sustainment) as required.
(a) (U) Class I Rations. Identify and list the issue and ration cycle, ration stockage objectives,
and the bulk water locations.
(b) (U) Class II Organizational Clothing and Individual Equipment and Maps. Identify and list
organizational clothing and individual equipment available for this operation. Submit classified map
requests through G-2 (S-2) channels.
(c) (U) Class III Bulk Fuel; Class III Package Petroleum, Oils, and Lubricants. Identify and list
quantities of petroleum, oil, and lubricant; locations of the retail and bulk fuel points; and types of products
available at each site available to support the operation.
(d) (U) Class IV Construction and Fortification Material. Identify and list construction and
fortification or barrier material available for this operation including command-controlled items.
(e) (U) Class V Munitions. Identify and list available ammunition and the controlled supply
rates. List the procedures to request explosive ordnance disposal support. Refer to Annex E (Protection) as
required for explosive ordnance disposal support.
(f) (U) Class VI Personal Demand Items. Describe the Class VI plan. Identify and list items
available.
(g) (U) Class VII Major End Items. Identify and list major end items available for this operation.
[page number]
[CLASSIFICATION]
14 September 2011 ATTP 5-0.1 F-3