Attachment 1-7 - City of Ryde
Attachment 1-7 - City of Ryde
Attachment 1-7 - City of Ryde
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Council <strong>Attachment</strong>s Page 192<br />
ITEM 12 (continued) ATTACHMENT 7<br />
Trim<br />
No/<br />
Subject<br />
D12/53064<br />
D12/53164<br />
D12/53035<br />
D12/52893<br />
D12/53073<br />
Issue Comments Recommended Action<br />
137 – 143 Herring Rd<br />
The land contains 4 residential<br />
flat buildings. The current<br />
controls permit FSR 1:1 and<br />
maximum building height <strong>of</strong><br />
15.5m. The current zoning is B4.<br />
Submission request<br />
consideration <strong>of</strong> the FSR and<br />
height for the site to be amended<br />
to reflect FSR and heights <strong>of</strong><br />
recent Part 3A applications on<br />
land adjoining the site.<br />
The submission proposes an<br />
FSR 4.5:1<br />
Height 20 storeys.<br />
86 Blenheim Rd/12 – 14 Epping<br />
Rd<br />
Request the rezoning <strong>of</strong> subject<br />
land from R2 to R4 with an<br />
<strong>Attachment</strong> 7 - Council report 24 July 2012 - Draft <strong>Ryde</strong> LEP 2011 - Submissions<br />
2011. Council's assistance with map<br />
changes may be required.<br />
No further action required at this time.<br />
The site is located in the Macquarie<br />
Park Corridor – the planning<br />
provisions for the corridor and<br />
currently under review and are being<br />
considered separately to DLEP 2011.<br />
The issue raised in the submission will<br />
be considered as part <strong>of</strong> the review <strong>of</strong><br />
the existing controls in the Corridor<br />
(review <strong>of</strong> DLEP 2010 Amendment 1)<br />
this will be reported to Council later in<br />
2012/2013.<br />
The site is considered an island site<br />
being surrounded by parkland and<br />
located on Epping Road.<br />
It is recommended that the R2 zone<br />
associated planning controls are