Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9ToolManagement 9.4 Examples<br />
9.4 Examples<br />
9-130<br />
The examples show how to<br />
12.01<br />
S use the configuration files (TM_WO_GR.8X0 and TM_W_GR.8X0) and where<br />
they have to be adapted if appropriate.<br />
S use the STL sources (TM_WO_GR.AWL and TM_W_GR.AWL) and where<br />
the blocks generated must be called.<br />
9.4.1 Example 1: Machine with disk-type magazine<br />
Precondition<br />
Set NC machine<br />
data<br />
Adapting the<br />
configuration file<br />
Disk-type magazine with 30 locations: Tool change is carried out directly in the<br />
spindle.<br />
Table 9-3 NC machine data for <strong>ShopMill</strong><br />
NC MD<br />
number<br />
Name Value<br />
18086 $MN_MM_NUM_MAGAZINE_LOCATION 35<br />
Match the configuration file TM_WO_GR.8X0 (configuration without dual<br />
gripper) at the points marked in bold type and load into the NC.<br />
%_N_TO_TMA_INI<br />
CHANDATA (1)<br />
;-------------------<br />
;Magazine configuration<br />
;-------------------<br />
;Delete old data<br />
;----------------<br />
$TC_MAP1 [0]=0<br />
$TC_DP1 [0,0]=0<br />
;Type of search strategy<br />
;-----------------<br />
$TC_MAMP2=257 ; Search for active tools<br />
; from 1st location onwards<br />
;Magazine definition<br />
;--------------<br />
;Real magazine<br />
$TC_MAP1 [1]=1 ; magazine kind (1: chain)<br />
$TC_MAP3 [1]=17 ; magazine status (17: active<br />
; magazine, enable for<br />
; loading)<br />
$TC_MAP6 [1]=1 ; number of magazine tiers<br />
$TC_MAP7 [1]=30 ; number of magazine locations<br />
E Siemens AG, 2001. All rights reserved<br />
<strong>SINUMERIK</strong> <strong>840D</strong>/<strong>810D</strong> Description of Functions <strong>ShopMill</strong> (FBSP) - 12.01 Edition