Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6Machine Data<br />
6.2 Display machine data for <strong>ShopMill</strong><br />
9626 $MM_CTM_TRACE<br />
MD number Settings in <strong>ShopMill</strong><br />
Default setting: 1 Min. input limit: 0000 Max. input limit: FFFF<br />
Changes valid from: IMMEDIATE Protection level: 3/4 Unit: Hex<br />
Data type: WORD Valid as of software version:<br />
<strong>840D</strong> SW 6.2, <strong>810D</strong> SW 4.2<br />
Meaning: Bit 0: Display of /xy version<br />
Bits 1 to 13: Reserved<br />
Bit 14: Calculation of ZO data in current ZO if bit 14== 0<br />
6-76<br />
12.01<br />
9650 $MM_CMM_POS_COORDINATE_SYSTEM<br />
MD number Position of coordinate system<br />
Default setting: 0 Min. input limit: 0 Max. input limit: 47<br />
Changes valid from: IMMEDIATE Protection level: 3/4 Unit: -<br />
Data type: BYTE Valid as of software version:<br />
<strong>840D</strong> SW 4.3, <strong>810D</strong> SW 2.3<br />
Meaning: You can use this MD to match the coordinate system of the operator interface to that of the<br />
machine.<br />
The coordinate system can assume the following positions:<br />
+Z<br />
+Y<br />
+Z<br />
+X<br />
+Y<br />
+X<br />
+Y<br />
+X<br />
+Z<br />
0 +X 1 +Z<br />
2 +Y<br />
3<br />
+Z<br />
+Y<br />
+X<br />
+Y<br />
4<br />
+X<br />
5 +Z 6<br />
+X<br />
+Y 7<br />
+Y +Z<br />
+X<br />
+Z +X<br />
+Y<br />
+Z<br />
+Y<br />
+Z<br />
8 +Y 9 +X<br />
10 +Z<br />
+Y<br />
11<br />
+X<br />
+X<br />
+Z +Y<br />
+Z<br />
+X<br />
+Y<br />
12<br />
+Y<br />
13 +X 14<br />
+Y<br />
+Z<br />
15<br />
+Z<br />
+X<br />
+Y<br />
+X<br />
+Y<br />
+Z<br />
+X<br />
+Z<br />
+X<br />
16 +Z 17 +Y<br />
18 +X<br />
+Z<br />
19<br />
+Y<br />
+Y<br />
+X +Z<br />
+X<br />
+Y<br />
+Z<br />
+Z<br />
20<br />
+Z<br />
21 +Y 22 +X<br />
23<br />
+X<br />
+Y<br />
+Z<br />
E Siemens AG, 2001. All rights reserved<br />
<strong>SINUMERIK</strong> <strong>840D</strong>/<strong>810D</strong> Description of Functions <strong>ShopMill</strong> (FBSP) - 12.01 Edition<br />
+X