SINUMERIK 840D/810D ShopMill

More documents

Recommendations

Info

13 Miscellaneous 13.9 ShopMill Open (PCU 50) 13.9 ShopMill Open (PCU 50) 13.9.1 Basic menu bar Jump into application Return jump from application 13-182 12.01 The difference between ShopMill Open and ShopMill Classic is that the Open variant has a basic menu bar or extended basic menu bar. It is not possible to change to the CNC ISO operator interface in ShopMill Open, but the HMI Advanced operating areas “Parameters” (without tool management and zero offsets), “Services”, “Diagnosis” and “Start-Up” are directly accessible via the extended horizontal softkey menu. Furthermore, you can integrate Windows applications via softkeys in the basic menu bar in ShopMill Open. You must install these Windows applications in the “OEM” directory and define them in file “Regie.ini”. For further details, see on the ShopMill CD-ROM: References: User’s Manual HMI Programming Package Part 1 (BN). There are various methods by which you can integrate Windows applications into the basic menu bar: Horizontal softkey 4, i.e. the Messages/Alarms operating area is replaced User-assignable softkeys 7 and 8 User-assignable softkeys 1 to 8 in the extended horizontal softkey menu There are 3 methods by which you can jump from the Windows application to another operating area: Using the ”Menu Select” key on the operator panel, you can return to the basic menu bar and then select another operating area via a softkey. You can configure the keys “Position”, “Program”, “Offset”, “Program Manager”, “Alarm” and “Custom” on the operator panel to branch directly into another operating area or sub-menu. You can configure so-called ”PLC keys” to branch into another operating area or sub-menu. References: /IAM/, Installation & Start-Up Guide HMI, Expand the Operator Interface (BE1) Keywords “OP Hotkeys” and “PLC Keys” Siemens AG, 2001. All rights reserved SINUMERIK 840D/810D Description of Functions ShopMill (FBSP) – 12.01 Edition
12.01 Siemens AG, 2001. All rights reserved SINUMERIK 840D/810D Description of Functions ShopMill (FBSP) – 12.01 Edition 13 Miscellaneous 13.10 Cycles/measuring cycles support in the G code editor 13.10 Cycles/measuring cycles support in the G code editor You can integrate screenforms in the G code editor which will offer you assistance in programming drilling, milling, turning and measuring cycles. These cycles can then be recompiled automatically. You must create a link between the softkeys which call this cycles/measuring cycles support function and the configuring file of the support screens in file COMMON.COM (in the user cycles directory CUS.DIR): sc8493=aeditor.com ; Drilling (horizontal softkey 3) sc8494=aeditor.com ; Milling (horizontal softkey 4) sc8495=aeditor.com ; Turning (horizontal softkey 5) sc8402=aeditor.com ; Measuring of milling (horizontal softkey 2 ; on the extended softkey bar) sc8403=aeditor.com ; Measuring of turning (horizontal softkey 3 ; on the extended softkey bar) For further information, please see: References: /IAM/, Installation & Start-up Guide HMI, BE1 Expand the Operator Interface. 13-183
Page 1:
SINUMERIK 840D/810D Description of
Page 4 and 5:
SINUMERIK R Documentation Printing
Page 6 and 7:
Preface Searching aids Notes Warnin
Page 8 and 9:
Preface viii Notes 12.01 E Siemens
Page 10 and 11:
Contents x 12.01 7 Reserved Functio
Page 12 and 13:
Contents xii Notes 12.01 Siemens A
Page 14 and 15:
1Hardware 1.1 Hardware assembly Tab
Page 16 and 17:
1Hardware 1.2 Examples for assignin
Page 18 and 19:
2Installation and Start-Up 2.1 Prec
Page 20 and 21:
2Installation and Start-Up 2.2 Init
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
2Installation and Start-Up 2.3 Seri
Page 34 and 35:
3 Supplementary Conditions 3-34 Not
Page 36 and 37:
4PLCProgram 4.2 Example for OB1 and
Page 38 and 39:
4PLCProgram 4.2 Example for OB1 and
Page 40 and 41:
4PLCProgram 4.3 Overview of blocks
Page 42 and 43:
4PLCProgram 4.4 Description of bloc
Page 44 and 45:
4PLCProgram 4.4 Description of bloc
Page 46 and 47:
4PLCProgram 4.5 Standard interface
Page 48 and 49:
5SignalDescription 5.1 Overview of
Page 50 and 51:
5SignalDescription 5.1 Overview of
Page 52 and 53:
5SignalDescription 5.2 Description
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
6Machine Data 6.1 NC machine data f
Page 72 and 73:
6Machine Data 6.2 Display machine d
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
7 Reserved Functions 7-88 Notes 12.
Page 90 and 91:
8 Tools 8.1 Tool-changing cycle ada
Page 92 and 93:
8 Tools 8.2 Manual tools 8.2 Manual
Page 94 and 95:
8 Tools 8.4 Activate tool-specific
Page 96 and 97:
8 Tools 8.5 Modify texts for tool-s
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
9ToolManagement 9.1 Overview of fun
Page 104 and 105:
9ToolManagement 9.2 Start-up of the
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
9ToolManagement 9.3 Tool management
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
9ToolManagement 9.4 Examples 9.4 Ex
Page 132 and 133: 9ToolManagement 9.4 Examples Create
Page 134 and 135: 9ToolManagement 9.4 Examples 9-134
Page 136 and 137: 9ToolManagement 9.5 Configuring the
Page 144 and 145: 10 Measuring Cycles 10.2 Probe conn
Page 146 and 147: 10 Measuring Cycles 10.3 Functional
Page 148 and 149: 10 Measuring Cycles 10.4 Start-up s
Page 150 and 151: 10 Measuring Cycles 10.4 Start-up s
Page 152 and 153: 10 Measuring Cycles 10.5 Machine da
Page 158 and 159: 11 Network Link 11.2 Linking Window
Page 160 and 161: 11 Network Link 11.2 Linking Window
Page 162 and 163: 12 Access Protection via Password a
Page 168 and 169: 13 Miscellaneous 13.1 Configuring t
Page 170 and 171: 13 Miscellaneous 13.2 Configuring t
Page 172 and 173: 13 Miscellaneous 13.3 Cylinder surf
Page 174 and 175: 13 Miscellaneous 13.3 Cylinder surf
Page 176 and 177: 13 Miscellaneous 13.4 Swivel heads
Page 178 and 179: 13 Miscellaneous 13.5 Multiple clam
Page 180 and 181: 13 Miscellaneous 13.7 Spindle contr
Page 184 and 185: 13 Miscellaneous 13.11 User status
Page 186 and 187: 13 Miscellaneous 13.12 OP hotkeys,
Page 188 and 189: A Abbreviations MCP MD MMC MPF MPI
Page 190 and 191: A Abbreviations A-190 Notes 12.01
Page 192 and 193: B References User Documentation /AU
Page 194 and 195: B References /PGT/ /PGZ/ /PI / /SYI
Page 196 and 197: B References /FB3/ /FBA/ B-196 A4 D
Page 198 and 199: B References /FBO/ /FBP/ /FBR/ /FBS
Page 200 and 201: B References /PJU/ /POS1/ /POS2/ /P
Page 202 and 203: B References B-202 Notes 12.01 Sie
Page 204 and 205: C Index N NC machine data exact val
Page 206: SINUMERIK 840D/810D Documentation o
show all

SINUMERIK 840D/810D ShopMill

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?