You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12.01<br />
E Siemens AG, 2001. All rights reserved<br />
<strong>SINUMERIK</strong> <strong>840D</strong>/<strong>810D</strong> Description of Functions <strong>ShopMill</strong> (FBSP) - 12.01 Edition<br />
10 Measuring Cycles<br />
10.5 Machine data for the measuring cycles sequence<br />
9764 CMM_TOOL_PROBE_ALLOW_AXIS<br />
MD number Permissible axis directions for tool probe (ZYX)<br />
Default setting: 133 Min. input limit: 0 Max. input limit: 333<br />
Change applies from: IMMEDIATE Protection level: 3/4 Unit: -<br />
Data type: WORD Valid as of SW:<br />
<strong>840D</strong> SW 4.3, <strong>810D</strong> SW 2.3<br />
Meaning: This MD defines the permissible axes and the axis directions in which measurements can<br />
be taken at the tool probe.<br />
The number to be specified is made up of ZYX. The following attributes can be specified<br />
for each axis:<br />
0 not possible<br />
1 only in minus direction<br />
2 only in plus direction<br />
3 in both directions<br />
Sample application: Default setting 133 means<br />
1st number: 1 Measuring in Z possible in both directions<br />
2nd number: 3 Measuring in Y possible in both directions<br />
3rd number: 3 Measuring in X possible in both directions<br />
9765 CMM_T_PROBE_DIAM_LENGTH_MEA<br />
MD number Diameter of tool probe for length measurement<br />
Default setting: 0 Min. input limit: 0 Max. input limit: 100000<br />
Change applies from: IMMEDIATE Protection level: 3/4 Unit: mm<br />
Data type: DOUBLE Valid as of SW:<br />
<strong>840D</strong> SW 4.3, <strong>810D</strong> SW 2.3<br />
Meaning: This MD defines the active diameter or the active edge of the tool probe for measurement<br />
of the tool length.<br />
9766 CMM_T_PROBE_DIAM_RAD_MEAS<br />
MD number Diameter of tool probe for radius measurement<br />
Default setting: 0 Min. input limit: 0 Max. input limit: 100000<br />
Change applies from: IMMEDIATE Protection level: 3/4 Unit: mm<br />
Data type: DOUBLE Valid as of SW:<br />
<strong>840D</strong> SW 4.3, <strong>810D</strong> SW 2.3<br />
Meaning: This MD defines the effective diameter or the effective edge of the tool probe for the radius<br />
measurement.<br />
9767 CMM_T_PROBE_DIST_RAD_MEAS<br />
MD number Infeed from top edge of tool probe for radius measurement<br />
Default setting: 0 Min. input limit: 0 Max. input limit: 100000<br />
Change applies from: IMMEDIATE Protection level: 3/4 Unit: mm<br />
Data type: DOUBLE Valid as of SW:<br />
<strong>840D</strong> SW 4.3, <strong>810D</strong> SW 2.3<br />
Meaning: This MD defines the distance between the top edge of the tool probe and the bottom edge<br />
of the tool for the radius measurement.<br />
10-155
Change language