You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9ToolManagement 9.5 Configuring the operator interface<br />
Identifiers<br />
9-138<br />
The SCREEN_, TOOL_ and CONTENT_IDs which are available for defining<br />
columns are listed below.<br />
Table 9-5 SCREEN_IDENTIFIER<br />
SCREEN_IDENTIFIER Tool management list<br />
TOOL_LIST Tool list<br />
TOOL_LIST_2ND_EDGE Tool list, 2nd edge<br />
TOOL_WEAR Tool wear list<br />
TOOL_WEAR_2ND_EDGE Tool wear list, 2nd edge<br />
TOOL_MAGA Magazine list<br />
Table 9-6 TOOL_IDENTIFIER<br />
TOOL_IDENTIFIER Tool<br />
SHANK_END_CUTTER (End) mill<br />
POINTED_DRILL (Twist) drill<br />
LOCATOR Centering tool<br />
3DTRACER 3D probe<br />
EDGE_TRACER Edge probe<br />
3DCUTTER_110 Cylindrical die mill<br />
3DCUTTER_111 Ball end mill<br />
3DCUTTER_121 End mill with corner rounding<br />
3DCUTTER_155 Bevel cutter<br />
3DCUTTER_156 Bevel cutter with corner rounding<br />
3DCUTTER_157 Tapered die mill<br />
Table 9-7 CONTENT_ID<br />
CONTENT_ID Parameter or property<br />
EMPTY Empty field<br />
NOT_USED Empty column<br />
LENGTH Length<br />
RADIUS Radius<br />
RADIUS_DIAM Radius with possible diameter calculation<br />
ANGLE Angle<br />
N Number of teeth<br />
SPINDLE Spindle direction<br />
COOL1 Cooling water 1<br />
COOL2 Cooling water 2<br />
MFCT1 Customized M function 1<br />
MFCT2 Customized M function 2<br />
MFCT3 Customized M function 3<br />
MFCT4 Customized M function 4<br />
12.01<br />
E Siemens AG, 2001. All rights reserved<br />
<strong>SINUMERIK</strong> <strong>840D</strong>/<strong>810D</strong> Description of Functions <strong>ShopMill</strong> (FBSP) - 12.01 Edition
Change language