Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
12.01<br />
E Siemens AG, 2001. All rights reserved<br />
<strong>SINUMERIK</strong> <strong>840D</strong>/<strong>810D</strong> Description of Functions <strong>ShopMill</strong> (FBSP) - 12.01 Edition<br />
5SignalDescription 5.2 Description of <strong>ShopMill</strong> interface DB82<br />
DB82 select_spindle_readout_0<br />
DBX11.3 Select spindle speed display bit 0<br />
Data block Signal(s) to <strong>ShopMill</strong><br />
Edge evaluation: no Signal(s) updated: cyclically Signal(s) valid as of software version:<br />
<strong>840D</strong> SW 6.2, <strong>810D</strong> SW 4.2<br />
Signal meaning This signal is not evaluated by <strong>ShopMill</strong><br />
DB82 select_spindle_readout_1<br />
DBX11.4 Select spindle speed display bit 1<br />
Data block Signal(s) to <strong>ShopMill</strong><br />
Edge evaluation: no Signal(s) updated: cyclically Signal(s) valid as of software version:<br />
<strong>840D</strong> SW 6.2, <strong>810D</strong> SW 4.2<br />
Signal meaning This signal is not evaluated by <strong>ShopMill</strong><br />
DB82 ext_m_cmd_1<br />
DBX12 1st extended M command for output of tool-specific M functions<br />
Data block Signal(s) to <strong>ShopMill</strong><br />
Edge evaluation: no Signal(s) updated: cyclically Signal(s) valid as of software version:<br />
<strong>840D</strong> SW 6.1, <strong>810D</strong> SW 4.1<br />
Signal state 1 or edge<br />
change 0 - - ->1<br />
<strong>ShopMill</strong> utilizes 2 extended M functions to output tool-specific M functions. The M command<br />
for the 1st extended M function is entered in this interface signal. The GUD7 variable/<br />
display machine data 9684 $MM_CMM_M_CODE_TOOL_BITS_1 must be set to this value<br />
at the same time. The default setting is 90.<br />
-<br />
Signal state 0 or<br />
edge change 1 - ->0<br />
Corresponding to ... DB19, DBB13, ext_m_cmd_2,<br />
GUD7 variable, display machine data<br />
DB82 ext_m_cmd_2<br />
DBX13 2nd extended M command for output of tool-specific M functions<br />
Data block Signal(s) to <strong>ShopMill</strong><br />
Edge evaluation: no Signal(s) updated: cyclically Signal(s) valid as of software version:<br />
<strong>840D</strong> SW 6.1, <strong>810D</strong> SW 4.1<br />
Signal state 1 or edge<br />
change 0 - - ->1<br />
<strong>ShopMill</strong> utilizes 2 extended M functions to output tool-specific M functions. The M command<br />
for the 2nd extended M function is entered in this interface signal. The GUD7 variable/display<br />
machine data 9684 $MM_CMM_M_CODE_TOOL_BITS_2 must be set to this<br />
value at the same time. The default setting is 91.<br />
-<br />
Signal state 0 or<br />
edge change 1 - ->0<br />
Corresponding to ... DB19, DBB13, ext_m_cmd_1,<br />
GUD7 variable, display machine data<br />
5-59
Change language