Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
12.01<br />
9.4.2 Example 2: Machine with chain magazine<br />
Precondition<br />
Set NC machine<br />
data<br />
Adapt the configuration<br />
file<br />
E Siemens AG, 2001. All rights reserved<br />
<strong>SINUMERIK</strong> <strong>840D</strong>/<strong>810D</strong> Description of Functions <strong>ShopMill</strong> (FBSP) - 12.01 Edition<br />
9ToolManagement 9.4 Examples<br />
Chain magazine with 30 locations: The tool change is carried out in the spindle<br />
with gripper 1/2.<br />
Table 9-4 NC machine data for <strong>ShopMill</strong><br />
NC MD<br />
number<br />
Name Value<br />
18086 $MN_MM_NUM_MAGAZINE_LOCATION 35<br />
Adapt configuration file TM_W_GR.8X0 (configuration with dual gripper) at the<br />
points marked in bold type and load into the NC.<br />
%_N_TO_TMA_INI<br />
CHANDATA (1)<br />
;-------------------<br />
;Magazine configuration<br />
;-------------------<br />
;Delete old data<br />
;----------------<br />
$TC_MAP1 [0]=0<br />
$TC_DP1 [0,0]=0<br />
;Type of search strategy<br />
;-----------------<br />
$TC_MAMP2=257 ; Search for active tools from<br />
; 1st location onwards<br />
;Magazine definition<br />
;--------------<br />
;Real magazine<br />
$TC_MAP1 [1]=1 ; magazine kind (1: chain)<br />
$TC_MAP3 [1]=17 ; magazine status (17: active<br />
; magazine, enable for loading)<br />
$TC_MAP6 [1]=1 ; number of magazine tiers<br />
$TC_MAP7 [1]=30 ; number of magazine locations<br />
;Buffer magazine<br />
$TC_MAP1 [9998]=7 ; magazine kind (7: buffer)<br />
$TC_MAP3 [9998]=17<br />
$TC_MAP6 [9998]=1<br />
$TC_MAP7 [9998]=3 ; number of buffer locations<br />
; (3: Spindle with dual gripper)<br />
;Load magazine<br />
$TC_MAP1 [9999]=9 ; magazine kind (9: load magazine)<br />
$TC_MAP3 [9999]=17<br />
$TC_MAP6 [9999]=1<br />
$TC_MAP7 [9999]=2 ; number of load points<br />
9-133