SINUMERIK 840D/810D ShopMill

11 Network Link
11.2 Linking Windows network drives to ShopMill
11.2 Linking Windows network drives to ShopMill
Setting up the network
management
11.2.1 PCU 20
Define the drive
names
Example
Enter the drive
paths
11-158
12.01
A total of 4 softkeys are provided on the horizontal softkey menu in the ShopMill
“Program Manager” operating area for configuring the network management
function. Softkeys 2 to 5 can be configured freely via display machine data.
Note
Note that the directories of servers can only be linked if they are available.
Proceed as follows to link the Windows network drives:
Enter the drive names for the 2nd to 5th softkeys of the horizontal softkey menu
in text file aluc.txt.
The relevant syntax is:
[text number] 0 0 “[softkey text]”
You must assign the softkey texts to the following text numbers:
Softkey 2: 89901
Softkey 3: 89902
Softkey 4: 89903
Softkey 5: 89904
The two parameters 2 and 3 separated by blanks are control characters for text
output and must always be set to 0.
Note
A line break in the softkey text can be made by inserting two consecutive
blanks. You can use up to 9 characters per line.
A “aluc.txt” text file is stored in every language directory.
In the Program Manager of ShopMill, the 2nd horizontal softkey must be assigned
the name ”NETZ1” in German.
The following entry must be made in text file “aluc_txt”:
89901 0 0 “NETZ1”
Enter the drive path of the relevant softkey in display MD 9676 to 9679.
E Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Description of Functions ShopMill (FBSP) - 12.01 Edition