You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2Installation and Start-Up<br />
2.2 Initial start-up sequence<br />
Language<br />
2-26<br />
If you want to display all connected drives, proceed as follows:<br />
1. Switch on the control and when the message<br />
”Sinumerik” appears as the PCU 50 is booting, press<br />
the ”Cursor down” key and then ”Enter”.<br />
2. Select Option “Install/Update <strong>SINUMERIK</strong><br />
System”.<br />
3. Enter password.<br />
4. Select option “Install from Network Drive”.<br />
5. Select option “Show connected Network Drives”.<br />
Fig. 2-9 Show connected drives<br />
If you want to disconnect from all network drives again, proceed as follows:<br />
1. Switch on the control and when the message<br />
”Sinumerik” appears as the PCU 50 is booting, press<br />
the ”Cursor down” key and then ”Enter”.<br />
2. Select Option “Install/Update <strong>SINUMERIK</strong><br />
System”.<br />
3. Enter password.<br />
4. Select option “Install from Network Drive”.<br />
5. Select option “Disconnect from all Network Drives”.<br />
Fig. 2-10 Disconnect from network drives<br />
12.01<br />
The <strong>ShopMill</strong> software package includes 5 languages (German, English,<br />
French, Italian and Spanish).<br />
The foreground language is always German.<br />
To select the background language, press the softkeys ”MMC” and ”Languages”<br />
in succession in the ”Start-up” operating area on the CNC ISO operator interface<br />
and mark the desired language.<br />
Use the ”Change Language” softkey to toggle between the foreground and<br />
background language in the ”Start-up” area of the CNC ISO operator interface.<br />
E Siemens AG, 2001. All rights reserved<br />
<strong>SINUMERIK</strong> <strong>840D</strong>/<strong>810D</strong> Description of Functions <strong>ShopMill</strong> (FBSP) - 12.01 Edition