SINUMERIK 840D/810D ShopMill

8 Tools
8.2 Manual tools
8.2 Manual tools
8-92
12.01
Manual tools are tools which are required during machining, but are only available
in the tool list but not in the tool-holding magazine. These tools must be attached/detached
manually to/from the spindle.
Machine data 22562 $MC_TOOL_CHANGE_ERROR_MODE, bit1=1,
can be set to allow tools without a magazine location assignment to be selected
for tool changes.
An alarm is output every time the manual tool is loaded, unloaded or replaced.
(E.g. “Channel 1, manual tool mill20, duplo no. 1 load to toolholder 1.” i.e. the
manual tool mill20 must be attached to the spindle.)
Manual tools are identified by magazine location 1 in magazine 9999 in the interface
to the PLC. Bit5 in DB72 DBB (n+0) is set to load the tool and bit6 to
unload it.
E Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Description of Functions ShopMill (FBSP) - 12.01 Edition