SINUMERIK 840D/810D ShopMill

More documents

Recommendations

Info

6Machine Data 6.2 Display machine data for ShopMill 6.2.2 Description of display machine data 9478 $MM_TO_OPTION_MASK MD number Settings for ShopMill Default setting: 1 Min. input limit: 0000 Max. input limit: FFFF Changes valid from: POWER ON Protection level: 1 Unit: Hex Data type: LONG Valid as of software version: 840D SW 6.2, 810D SW 4.2 Meaning: Bit0: Input extensions for ShopMill (cooling water, etc.) Bit1: Reserved Bit2: Reserved Bit3: Creation of new tools directly in a magazine location not allowed Bit4: Reserved Bit5: Reserved Bit6: Reserved Bit7: Input disable for loaded tools (wear data excepted) Bit8: Evaluate file to_mill.ini Bit9: No loading/unloading when program is running Bit10: Compute tool wear inputs additively Bit11: Spare 9600 $MM_CTM_SIMULATION_DEF_X MD number Simulation of default value X Default setting: 0 Min. input limit: -10000 Max. input limit: 10000 Changes valid from: POWER ON Protection level: 3/4 Unit: mm Data type: LONG Valid as of software version: 840D SW 4.3, 810D SW 2.3 Meaning: This MD defines the size of the X coordinate of the display area. When you press softkey TO ORIGIN in simulation mode, you will go to the value set in this MD. Corresponding to ... MD 9601 $MM_CTM_SIMULATION_DEF_Y MD 9602 $MM_CTM_SIMULATION_DEF_VIS_AREA 9601 $MM_CTM_SIMULATION_DEF_Y MD number Simulation of default value Y Default setting: 0 Min. input limit: -10000 Max. input limit: 10000 Changes valid from: POWER ON Protection level: 3/4 Unit: mm Data type: LONG Valid as of software version: 840D SW 4.3, 810D SW 2.3 Meaning: This MD defines the size of the Y coordinate of the display area. When you press softkey TO ORIGIN in simulation mode, you will go to the value set in this MD. Corresponding to ... MD 9600 $MM_CTM_SIMULATION_DEF_X MD 9602 $MM_CTM_SIMULATION_DEF_VIS_AREA 6-74 12.01 E Siemens AG, 2001. All rights reserved SINUMERIK 840D/810D Description of Functions ShopMill (FBSP) - 12.01 Edition
12.01 E Siemens AG, 2001. All rights reserved SINUMERIK 840D/810D Description of Functions ShopMill (FBSP) - 12.01 Edition 6Machine Data 6.2 Display machine data for ShopMill 9602 $MM_CTM_SIMULATION_DEF_VIS_AREA MD number Simulation of default display area Default setting: 100 Min. input limit: -10000 Max. input limit: 10000 Changes valid from: POWER ON Protection level: 3/4 Unit: mm Data type: LONG Valid as of software version: 840D SW 4.3, 810D SW 2.3 Meaning: This MD defines the size of the display area above the X coordinate. The Y coordinate is calculated automatically from this setting. Corresponding to ... MD 9600 $MM_CTM_SIMULATION_DEF_X MD 9601 $MM_CTM_SIMULATION_DEF_Y 9603 $MM_CTM_SIMULATION_MAX_X MD number Simulation of maximum display X Default setting: 0 Min. input limit: -10000 Max. input limit: 10000 Changes valid from: POWER ON Protection level: 3/4 Unit: mm Data type: LONG Valid as of software version: 840D SW 4.3, 810D SW 2.3 Meaning: This MD defines the size of the X coordinate of a second display area (e.g. for larger workpieces). When you press softkey MAX in simulation mode, the value preset in this MD will apply. Corresponding to ... MD 9604 $MM_CTM_SIMULATION_MAX_Y MD 9605 $MM_CTM_SIMULATION_MAX_VIS_AREA 9604 $MM_CTM_SIMULATION_MAX_Y MD number Simulation of maximum display Y Default setting: 0 Min. input limit: -10000 Max. input limit: 10000 Changes valid from: POWER ON Protection level: 3/4 Unit: mm Data type: LONG Valid as of software version: 840D SW 4.3, 810D SW 2.3 Meaning: This MD defines the size of the Y coordinate of a second display area. When you press softkey MAX in simulation mode, the value preset in this MD will apply. Corresponding to ... MD 9603 $MM_CTM_SIMULATION_MAX_X MD 9605 $MM_CTM_SIMULATION_MAX_VIS_AREA 9605 $MM_CTM_SIMULATION_MAX_VIS_AREA MD number Simulation of maximum display area Default setting: 1000 Min. input limit: -10000 Max. input limit: 10000 Changes valid from: POWER ON Protection level: 3/4 Unit: mm Data type: LONG Valid as of software version: 840D SW 4.3, 810D SW 2.3 Meaning: This machine data defines the second display area above the X coordinate. The Y coordinate is calculated automatically from this setting. Corresponding to ... MD 9603 $MM_CTM_SIMULATION_MAX_X MD 9604 $MM_CTM_SIMULATION_MAX_Y 6-75
Page 1:
SINUMERIK 840D/810D Description of
Page 4 and 5:
SINUMERIK R Documentation Printing
Page 6 and 7:
Preface Searching aids Notes Warnin
Page 8 and 9:
Preface viii Notes 12.01 E Siemens
Page 10 and 11:
Contents x 12.01 7 Reserved Functio
Page 12 and 13:
Contents xii Notes 12.01 Siemens A
Page 14 and 15:
1Hardware 1.1 Hardware assembly Tab
Page 16 and 17:
1Hardware 1.2 Examples for assignin
Page 18 and 19:
2Installation and Start-Up 2.1 Prec
Page 20 and 21:
2Installation and Start-Up 2.2 Init
Page 22 and 23:
2Installation and Start-Up 2.2 Init
Page 24 and 25: 2Installation and Start-Up 2.2 Init
Page 32 and 33: 2Installation and Start-Up 2.3 Seri
Page 34 and 35: 3 Supplementary Conditions 3-34 Not
Page 36 and 37: 4PLCProgram 4.2 Example for OB1 and
Page 38 and 39: 4PLCProgram 4.2 Example for OB1 and
Page 40 and 41: 4PLCProgram 4.3 Overview of blocks
Page 42 and 43: 4PLCProgram 4.4 Description of bloc
Page 44 and 45: 4PLCProgram 4.4 Description of bloc
Page 46 and 47: 4PLCProgram 4.5 Standard interface
Page 48 and 49: 5SignalDescription 5.1 Overview of
Page 50 and 51: 5SignalDescription 5.1 Overview of
Page 52 and 53: 5SignalDescription 5.2 Description
Page 70 and 71: 6Machine Data 6.1 NC machine data f
Page 72 and 73: 6Machine Data 6.2 Display machine d
Page 88 and 89: 7 Reserved Functions 7-88 Notes 12.
Page 90 and 91: 8 Tools 8.1 Tool-changing cycle ada
Page 92 and 93: 8 Tools 8.2 Manual tools 8.2 Manual
Page 94 and 95: 8 Tools 8.4 Activate tool-specific
Page 96 and 97: 8 Tools 8.5 Modify texts for tool-s
Page 102 and 103: 9ToolManagement 9.1 Overview of fun
Page 104 and 105: 9ToolManagement 9.2 Start-up of the
Page 120 and 121: 9ToolManagement 9.3 Tool management
Page 122 and 123: 9ToolManagement 9.3 Tool management
Page 124 and 125:
9ToolManagement 9.3 Tool management
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
9ToolManagement 9.4 Examples 9.4 Ex
Page 132 and 133:
9ToolManagement 9.4 Examples Create
Page 134 and 135:
9ToolManagement 9.4 Examples 9-134
Page 136 and 137:
9ToolManagement 9.5 Configuring the
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
10 Measuring Cycles 10.2 Probe conn
Page 146 and 147:
10 Measuring Cycles 10.3 Functional
Page 148 and 149:
10 Measuring Cycles 10.4 Start-up s
Page 150 and 151:
10 Measuring Cycles 10.4 Start-up s
Page 152 and 153:
10 Measuring Cycles 10.5 Machine da
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
11 Network Link 11.2 Linking Window
Page 160 and 161:
11 Network Link 11.2 Linking Window
Page 162 and 163:
12 Access Protection via Password a
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
13 Miscellaneous 13.1 Configuring t
Page 170 and 171:
13 Miscellaneous 13.2 Configuring t
Page 172 and 173:
13 Miscellaneous 13.3 Cylinder surf
Page 174 and 175:
13 Miscellaneous 13.3 Cylinder surf
Page 176 and 177:
13 Miscellaneous 13.4 Swivel heads
Page 178 and 179:
13 Miscellaneous 13.5 Multiple clam
Page 180 and 181:
13 Miscellaneous 13.7 Spindle contr
Page 182 and 183:
13 Miscellaneous 13.9 ShopMill Open
Page 184 and 185:
13 Miscellaneous 13.11 User status
Page 186 and 187:
13 Miscellaneous 13.12 OP hotkeys,
Page 188 and 189:
A Abbreviations MCP MD MMC MPF MPI
Page 190 and 191:
A Abbreviations A-190 Notes 12.01
Page 192 and 193:
B References User Documentation /AU
Page 194 and 195:
B References /PGT/ /PGZ/ /PI / /SYI
Page 196 and 197:
B References /FB3/ /FBA/ B-196 A4 D
Page 198 and 199:
B References /FBO/ /FBP/ /FBR/ /FBS
Page 200 and 201:
B References /PJU/ /POS1/ /POS2/ /P
Page 202 and 203:
B References B-202 Notes 12.01 Sie
Page 204 and 205:
C Index N NC machine data exact val
Page 206:
SINUMERIK 840D/810D Documentation o
show all

SINUMERIK 840D/810D ShopMill

Create successful ePaper yourself

Delete template?

Save as template?