SINUMERIK 840D/810D ShopMill

8 Tools
8.5 Modify texts for tool-specific functions
8.5.2 PCU 50
Text numbers
Language
assignment
8-98
12.01
For tool-specific functions, you can modify the parameter texts in the operation
area Program -- linear/circular, “Machine functions” menu and the cursor texts in
the tool list. Cursor texts are texts, shown in the message line when the cursor
is positioned on the relevant input field.
The desired texts must be entered in the text file C:\dh\cus.dir\aluc_xx.com. The
file “aluc_xx.com” may have to be created in directory “cus.dir”.
Add the following line in section [TextFiles} of file C:\user\mbdde.ini:
UserZYK=C:\dh\cus.dir\aluc_
The texts are assigned to the following text numbers in the file “aluc_xx.com”:
Table 8-3 Text assignment
Cursor texts in the “Tool list” menu Text number
Tool-specific function 1 (tool-spec. fct. 1) 89911
Tool-specific function 2 (tool-spec. fct. 2) 89912
Tool-specific function 3 (tool-spec. fct. 3) 89913
Tool-specific function 4 (tool-spec. fct. 4) 89914
Coolant 1 89921
Coolant 2
Parameter texts in the
“Program straight line/circle machine function” menu
89922
Tool-specific function 1 (tool-spec. fct. 1) 89915
Tool-specific function 2 (tool-spec. fct. 2) 89916
Tool-specific function 3 (tool-spec. fct. 3) 89917
Tool-specific function 4 (tool-spec. fct. 4) 89918
Coolant 1 89919
Coolant 2 89920
This means that text numbers 89911 and 89915 etc. refer to the same functions.
Note
The maximum number of character is 23 for the cursor texts and 14 for the
parameter texts.
The text language is assigned on the basis of the text file name. “xx” is replaced
by one of the following abbreviations in the text file name:
E Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Description of Functions ShopMill (FBSP) - 12.01 Edition