You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12.01<br />
Example<br />
Table 9-7 CONTENT_ID<br />
E Siemens AG, 2001. All rights reserved<br />
<strong>SINUMERIK</strong> <strong>840D</strong>/<strong>810D</strong> Description of Functions <strong>ShopMill</strong> (FBSP) - 12.01 Edition<br />
9ToolManagement 9.5 Configuring the operator interface<br />
CONTENT_ID Parameter or property<br />
DLENGTH Wear length<br />
DRADIUS Wear radius<br />
DRADIUS_DIAM Wear radius with possible diameter calculation<br />
T_OR_C Method of wear monitoring<br />
P_TIME Service life<br />
P_COUNT Quantity<br />
T_LOCKED Tool disabled<br />
T_SIZE Oversized tool<br />
T_FIXED Tool in fixed location<br />
P_LOCKED Magazine location disabled<br />
MAG_T_LOCKED Display only: Tool disabled<br />
MAG_T_SIZE Display only: Oversized tool<br />
MAG_T_FIXED Display only: Tool in fixed location<br />
H_NBR Fanuc H number<br />
;Tool list<br />
[TOOL_LIST]<br />
;Column default settings<br />
COLUMN1 = H_NBR<br />
COLUMN2 = LENGTH<br />
COLUMN3 = RADIUS_DIAM<br />
COLUMN4 = EMPTY<br />
COLUMN5 = EMPTY<br />
COLUMN6 = SPINDLE<br />
COLUMN7 = COOL1<br />
COLUMN8 = COOL2<br />
COLUMN9 = MFCT1<br />
COLUMN10= MFCT2<br />
COLUMN11= MFCT3<br />
COLUMN12= MFCT4<br />
;Deviations from default settings<br />
SHANK_END_CUTTER = 5=N<br />
POINTED_DRILL = 4=ANGLE<br />
LOCATOR = 3=EMPTY / ANGLE<br />
3DTRACER =<br />
EDGE_TRACER =<br />
3DCUTTER_110 = 5=N<br />
3DCUTTER_111 = 5=N<br />
3DCUTTER_121 = 5=N<br />
3DCUTTER_155 = 5=N<br />
3DCUTTER_156 = 5=N<br />
3DCUTTER_157 = 5=N<br />
9-139