SINUMERIK 840D/810D ShopMill

12.01
Example
Procedure
E Siemens AG, 2001. All rights reserved
SINUMERIK 840D/810D Description of Functions ShopMill (FBSP) - 12.01 Edition
8 Tools
8.5 Modify texts for tool-specific functions
The cursor text “Tool-spec. function 1” in the tool list should be changed to ”Air
cooling”.
You must make the following entry in file ”aluc.txt”:
89911 0 0 ”Air cooling”
The two parameters 2 and 3 separated by blanks are control characters for text
output and must always be set to 0.
To select file aluc.txt, proceed as follows:
S Switch to the subdirectory ...\instutil in the application environment.
S Call the APP_INST program.
S Select ”Modify configuration”.
S Specify whether the texts for the 1st or 2nd language are to be edited:
”Edit text files for first language” or
”Edit text files for second language”.
S Scroll through the menu until the option ”alarm texts for user cycles”
appears and then enter the corresponding number.
This opens the text file ALUC.TXT with the DOS editor ”edit”.
S Enter the texts of your choice.
S Save the file and close the editor.
S Press the ”ESC” key twice.
The text modifications become operative when you take the following steps:
S Select ”Install all modules on hardware”.
S Confirm your language selection with “F4 Accept”.
S Select ”Create Flash Memory Card image”.
S Specify the source drive for the system disks.
S Specify the target path for the system disks.
S Enter the target drive to which the file must be saved.
S Specify the target path for the file.
S Use SINUCOPY to create a PC card (see Subsection 2.2.1 Start-up on a
PCU 20).
S Load the PC card contents to the control (see Subsection 2.2.1 Start-up on
a PCU 20).
8-97