You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12.01<br />
Description of NC<br />
machine data<br />
Table 6-1 NC machine data for <strong>ShopMill</strong><br />
NC MD<br />
number<br />
E Siemens AG, 2001. All rights reserved<br />
<strong>SINUMERIK</strong> <strong>840D</strong>/<strong>810D</strong> Description of Functions <strong>ShopMill</strong> (FBSP) - 12.01 Edition<br />
6Machine Data<br />
6.1 NC machine data for <strong>ShopMill</strong><br />
Name<br />
Value<br />
20320 $MC_TOOL_TIME_MONITOR_MASK 1 G<br />
20734 $MC_EXTERN_FUNCTION_MASK H8 M<br />
21100 $MC_ORIENTATION_IS_EULER 0 G<br />
21110 $MC_X_AXIS_IN_OLD_X_Z_PLANE 0 G<br />
22550 $MC_TOOL_CHANGE_MODE 1 G<br />
22560 $MC_TOOL_CHANGE_M_CODE 206 V<br />
24002 $MC_CHBFRAME_RESET_MASK HFFFE G<br />
27860 $MC_PROCESSTIMER_MODE H02 G<br />
28000 $MC_MM_REORG_LOG_FILE_MEM 75 M<br />
28010 $MC_MM_NUM_REORG_LUD_MODULES 10 M<br />
28020 $MC_MM_NUM_LUD_NAMES_TOTAL 600 M<br />
28081 $MC_MM_NUM_BASE_FRAMES 1 M<br />
28082 $MC_MM_SYSTEM_FRAME_MASK H3D M<br />
35040 $MA_SPIND_ACTIVE_AFTER_RESET<br />
Note:<br />
This MD is not contained in machine data record<br />
cmm.8x0, since it is axis-dependent.<br />
Table 6-2 Setting data for <strong>ShopMill</strong><br />
Setting data<br />
number<br />
1 G<br />
Modifiable<br />
Name Value Modifiable<br />
42440 $SC_FRAME_OFFSET_INCR_PROG 0 G<br />
42442 $SC_TOOL_OFFSET_INCR_PROG 0 G<br />
42480 $SC_STOP_CUTCOM_STOPRE 0 G<br />
42980 $SC_TOFRAME_MODE 3 G<br />
References: /LIS/, Lists<br />
/IAC/, <strong>810D</strong> Installation and Start-Up Guide<br />
/IAD/, <strong>840D</strong> Installation and Start-Up Guide<br />
/FB/, Description of Functions<br />
6-71
Change language