Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10 Measuring Cycles<br />
10.5 Machine data for the measuring cycles sequence<br />
9760 CMM_MAX_SPIND_SPEED_ROT_SP<br />
MD number Maximum speed for tool measurement with rotating spindle<br />
Default setting: 1000 Min. input limit: 100 Max. input limit: 25000<br />
Change applies from: IMMEDIATE Protection level: 3/4 Unit: rpm<br />
Data type: DOUBLE Valid as of SW:<br />
<strong>840D</strong> SW 4.3, <strong>810D</strong> SW 2.3<br />
Meaning: For tool measurement with rotating spindle, this MD defines the maximum permissible<br />
speed of the tools to be measured.<br />
9761 CMM_MIN_FEED_ROT_SP<br />
MD number Minimum feed for tool measurement with rotating spindle<br />
Default setting: 10 Min. input limit: 0.01 Max. input limit: 1000<br />
Change applies from: IMMEDIATE Protection level: 3/4 Unit: mm/min<br />
Data type: DOUBLE Valid as of SW:<br />
<strong>840D</strong> SW 4.3, <strong>810D</strong> SW 2.3<br />
Meaning: This MD describes the minimum feed for “Measuring tool with rotating spindle”. Tools<br />
which have a very large radius and require high precision would otherwise have a very<br />
small feed.<br />
9762 CMM_MEAS_TOL_ROT_SP<br />
MD number Measuring accuracy for tool measurements with rotating spindle<br />
Default setting: 0.01 Min. input limit: 0 Max. input limit: 1<br />
Change applies from: IMMEDIATE Protection level: 3/4 Unit: mm<br />
Data type: DOUBLE Valid as of SW:<br />
<strong>840D</strong> SW 4.3, <strong>810D</strong> SW 2.3<br />
Meaning: This MD defines the desired accuracy of measurement for “Measuring a tool with rotating<br />
spindle”.<br />
9763 CMM_TOOL_PROBE_TYPE<br />
MD number Type of tool probe<br />
Default setting: 0 Min. input limit: 0 Max. input limit: 999<br />
Change applies from: IMMEDIATE Protection level: 3/4 Unit: -<br />
Data type: WORD Valid as of SW:<br />
<strong>840D</strong> SW 4.3, <strong>810D</strong> SW 2.3<br />
Meaning: This MD defines the type of tool probe.<br />
10-154<br />
Type Probe system<br />
0 Measuring cube<br />
101 Measuring disk in XY (1st and 2nd geometry axis)<br />
201 Measuring disk in ZX (3rd and 1st geometry axis)<br />
301 Measuring disk in YZ (2nd and 3rd geometry axis)<br />
12.01<br />
E Siemens AG, 2001. All rights reserved<br />
<strong>SINUMERIK</strong> <strong>840D</strong>/<strong>810D</strong> Description of Functions <strong>ShopMill</strong> (FBSP) - 12.01 Edition