6 Configuration commands - for Falcom STEPP
6 Configuration commands - for Falcom STEPP
6 Configuration commands - for Falcom STEPP
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>STEPP</strong>CONFIG VERSION 1.8.14<br />
(this is only an example, other configuration events are also possible).<br />
Finally configure the Master region via SMS command.<br />
• The parameters ,,,,,,<br />
or integrated into the &CNF WATCH command<br />
are the same one provided by the GEOMSG, but they are supported to<br />
be entered in the &CNF WATCH command by using the firmware<br />
1.6.5 and greater versions, only.<br />
• If one of the parameters ,,,,,<br />
, or is specified, the GEOMSG settings<br />
are also modified based on the user defined value.<br />
• If the Master region is deactivated (by sending the command &CNF<br />
WATCH 0), the GEOMSG settings are still available. The GEOMSG<br />
settings can only be cleared separately. If these settings are no more<br />
required <strong>for</strong> other geofencing regions by the user, to clear the command<br />
(&CNF UNIT GEOMSG) without parameter has to be sent to the<br />
<strong>STEPP</strong> device.<br />
• If the object (vehicle fitted with the FALCOM <strong>STEPP</strong>) enters (i) into the<br />
predefined master region, the SMS message delivered from the <strong>STEPP</strong><br />
device to the target phone number specified by the<br />
GEOMSG parameter includes:<br />
- the device name (if predefined),<br />
- the header (GEO00),<br />
- the specified by the WATCH parameter and<br />
- closed by the user selected protocols either by the <br />
property of the WATCH or GEOMSG parameter.<br />
e.g.<br />
+CMT: "+4917610022382",,"05/06/27,10:44:20+08"<br />
<strong>STEPP</strong> enters the zone<br />
$GPRMC,084509.984,A,5040.3998,N,01058.8412,E,0.06,350.84,<br />
270605,,*05<br />
$GPIOP,11000000,00000000,0.71,5.25,4.11*73<br />
• If the object (vehicle fitted with the FALCOM <strong>STEPP</strong>) leaves (i) the<br />
predefined master region, the SMS message delivered from the <strong>STEPP</strong><br />
device to the target phone number specified by the<br />
GEOMSG parameter includes:<br />
- the device name (if predefined),<br />
- the predefined text “GEO-ALARM 0”<br />
- closed by the user selected protocols either by the <br />
property of the WATCH or GEOMSG parameter.<br />
e.g.<br />
+CMT: "+4917610022382",,"05/06/27,10:44:20+08"<br />
<strong>STEPP</strong> GEO-ALARM 0<br />
$GPRMC,084509.984,A,5040.3998,N,01058.8412,E,0.06,350.84,<br />
270605,,*05<br />
$GPIOP,11000000,00000000,0.71,5.25,4.11*73<br />
i<br />
Feature of the Firmware 1.8.14 and greater versions<br />
i<br />
Feature of the Firmware 1.8.14 and greater versions<br />
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.<br />
Page 109
Change language