6 Configuration commands - for Falcom STEPP
6 Configuration commands - for Falcom STEPP
6 Configuration commands - for Falcom STEPP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>STEPP</strong>CONFIG VERSION 1.8.14<br />
4.2.1.2 Settings - COMport and MapSoftware<br />
Image 7: Port configuration and search path <strong>for</strong> map software<br />
Entry Description<br />
port GSM (1)<br />
port <strong>for</strong> output history<br />
data (2)<br />
COM Port of the connected communication device<br />
(e.g. <strong>Falcom</strong> SWING) or the <strong>Falcom</strong><strong>STEPP</strong> connected <strong>for</strong><br />
configuration.<br />
COM Port <strong>for</strong> output of history files to map software.<br />
baudrate (6)<br />
Setting the baud rate <strong>for</strong> the output of a history file to map<br />
software.<br />
enter your Map<br />
Please enter the path to your execution file of the map<br />
application (3)<br />
software used by you.<br />
save (4) Saves the entered data.<br />
exit (5) Closes the active window.<br />
Table 3: Settings<br />
• In field (1), enter the COM port to which you have connected your GSM<br />
modem (recommended <strong>Falcom</strong> SWING).<br />
• In field (2), enter the COM port over which you want to export the log data<br />
to the map software.<br />
• In the field “Select your MAP application” enter the search path to the<br />
execution file of you map software (e.g. Map&Guide– MgStart.exe).<br />
• Save the entries by clicking on the button “save” (4).<br />
• Chose the baud rate required <strong>for</strong> exporting to map software.<br />
• By clicking on “exit” (5), you will close the configuration window.<br />
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.<br />
Page 30
Change language