6 Configuration commands - for Falcom STEPP

STEPPCONFIG VERSION 1.8.14
4.2.3.1.1 General parameters (see image 9)
Entry Description
Device name (5)
Enter a device name (max. 20 digits) for the Falcom
STEPP to be configured (optional)
Enter a password (max. 10 digits) for the Falcom STEPP
to be configured (optional). The displayed one is
Password (6)
encrypted applying a 160-bit function. (see chapter 4.2)
Please note: With a configured password, remote
configuration via SMS is only possible
with the password
Enter the PIN number of the SIM card for the Falcom
Pin (7)
STEPP to be configured (with activated PIN absolutely
imperative).
Enter authorized telephone numbers (max. 10 numbers)
for the Falcom STEPP to be configured (optional).
Authorized numbers Please note: Once at least one number has been entered
(8)
into this table, only these numbers are authorized to
interact with the Falcom STEPP. All other calls are
ignored.
Defines the call type for each respective telephone
Voice, Data, Alarm, number.
SMS (9)
For further details, please read the chapter:
List box “authorized
“Authorized numbers”.
List of authorized numbers for remote access and
configuration.
numbers”(10)
For more details please read the chapter:
Add (11)
“Authorized numbers”.
Adds the number entered in field (8) to the authorized
numbers.
Delete (12)
Deletes the number marked in field (10) from the list of
authorized numbers.
Ringer melody (13) A list of ringer melodies for indicating an incoming call.
Speaker vol. (14) Adjusts the loudspeaker volume for incoming voice calls
Mic vol. (15) Adjusts microphone amplification for outgoing voice calls
Send (16)
Manually sends a device
(not required for all selections)
configuration command
Ignition timer (19) Currently not functional.
GPS Reset (21)
Defines the reset of GPS core (see the description follow
as well chapter 2.1, point 6, configuration over-air via
SMS)
GSM Reset (22)
Defines the reset of GSM core (see description follow as
well chapter 2.1, point 7 configuration over-air via SMS)
Table 6: Configuration – general parameters
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
Page 34