6 Configuration commands - for Falcom STEPP
6 Configuration commands - for Falcom STEPP
6 Configuration commands - for Falcom STEPP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>STEPP</strong>CONFIG VERSION 1.8.14<br />
•<br />
•<br />
•<br />
Click on [Next] to continue the installation (see image below)<br />
Click on [Next] again.<br />
Enter the installation path in the field Folder.<br />
Use [Browse...] to select a path.<br />
To terminate the installation, click on Cancel<br />
To go to the previous window, click on [Previous] (see image below).<br />
The software is installed under the defined path.<br />
Hint: If you click on the Cancel button, and you confirm the<br />
subsequent message with Yes, the installation will be<br />
terminated. No data will be stored on your PC’s hard-drive,<br />
and you will have to start the installation anew.<br />
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.<br />
Page 11