6 Configuration commands - for Falcom STEPP
6 Configuration commands - for Falcom STEPP
6 Configuration commands - for Falcom STEPP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>STEPP</strong>CONFIG VERSION 1.8.14<br />
6.3.5 PORT<br />
Syntax PORT=,,<br />
SMS<br />
command<br />
NMEA<br />
message<br />
This parameter is intended <strong>for</strong> changing the present status of the <strong>STEPP</strong><br />
digital outputs.<br />
:<br />
It specifies the index of output ports. The index can be set from 1 to 4<br />
corresponding to the provided output ports of the <strong>Falcom</strong> <strong>STEPP</strong><br />
respectively.<br />
:<br />
It specifies the trigger type, it can be set to A, E, I or Z.<br />
A = the user-specified PORT will be set to the OFF state.<br />
E = the user-specified PORT will be set to the ON state.<br />
I = the user-specified PORT will be set to E or A <strong>for</strong> a<br />
given time which means an impulse will be<br />
generated.<br />
Z = the user-specified the PORT will periodically be<br />
triggered to ON and OFF sates giving a periodic <br />
and impulses in second(s) respectively which<br />
means cyclic ON/OFF.<br />
<br />
Specifies the number of seconds <strong>for</strong> ON time period.<br />
:<br />
Specifies the number of seconds <strong>for</strong> OFF time period.<br />
How the parameter could be sent:<br />
&CNF UNIT PORT1=Z,1,1<br />
&CNF UNIT PORT2=E<br />
&CNF UNIT PORT3=A<br />
&CNF UNIT PORT4=I,2<br />
$PSRF108,PORT1=Z,1,1*4D<br />
$PSRF108,PORT2=E*51<br />
$PSRF108,PORT3=A*54<br />
$PSRF108,PORT4=I,2*45<br />
Notes<br />
• If the command &CNF UNIT PORT=I,5 (whereby the<br />
is not required) is sent to the device, the user-defined output<br />
alters its state from ON to OFF or vice versa <strong>for</strong> the user-specified<br />
time, independent of the output state. The software negates<br />
internally the regarding the current state of user-defined<br />
output PORT.<br />
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.<br />
Page 85