6 Configuration commands - for Falcom STEPP
6 Configuration commands - for Falcom STEPP
6 Configuration commands - for Falcom STEPP
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>STEPP</strong>CONFIG VERSION 1.8.14<br />
4.2 Menu bar<br />
Activate the desired menu option by clicking on it with the mouse or by using<br />
the keyboard and simultaneously pressing ALT and the underlined letter in the<br />
menu bar (e.g. Alt+E <strong>for</strong> Service mode).<br />
Please note: The menu option “Settings” is deactivated during the initialisation<br />
phase of the GSM modem (<strong>Falcom</strong> SWING).<br />
4.2.1 Settings Menu<br />
Image 5: Settings Menu<br />
Option Description<br />
Cars<br />
Chose this option if you wish to enter a new vehicle data<br />
set, or edit an existing one.<br />
Chose this option to specify the COMport <strong>for</strong><br />
COMport and<br />
communicating with a connected GSM modem (<strong>Falcom</strong><br />
SWING, 2D-1) or <strong>Falcom</strong> <strong>STEPP</strong>, and the COMport to<br />
MapSoftware<br />
save the output of the NMEA data from a history file to a<br />
map software and the path entry to a possibly existing<br />
MAP software.<br />
Reinitializing GSM Chose this menu option if you wish to re-initialise the<br />
module<br />
connected GSM modem.<br />
Table 1: Menu of Settings<br />
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.<br />
Page 28
Change language