Tooling Systems

KM SYSTEM
KM32 Shank Tools
TG — Single-Angle Collet Chucks
• Tremendous Grip (3:1 advantage).
• Balanced-by-design.
• Through-the-toolholder coolant capability.
QC / R8 SYSTEMS DV SYSTEM
CV SYSTEM
BT SYSTEM
HSK SYSTEM
Collet Capacity
mm inch
TG Collet Series min. max. min. max.
TG75 2,6 20,0 3/64 3/4
TG — Single-Angle Collet Chucks
CST D11 L1 L9 V
order number catalog number collet series mm inch mm inch mm inch mm inch
1144185 KM32TGB07575 TG75 50 1.97 75 2.953 53,0 2.09 2 .08
Spare Parts
locknut
wrench sizestop
screw
catalog number
locknut
wrench Nm ft.lbs stop screw
KM32TGB07575 LNA075M HSW45M 136 100 SS081041G 4 MM & 5/32
Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque.
Collet chuck technical section, see page 816.
Supplied with locknut and stop screw.
Locknut wrench must be ordered separately.
Interchangeable locknuts, coolant-style locknuts, and coolant discs are available and must be ordered separately; see page 746.
Stop screw coolant caps are available and must be ordered separately; see page 757.
Balanceable/Interchangeable locknuts are available and must be ordered separately; see page 740.
TG standard straight-bore collets, see page 657.
TG tap collets, see page 657.
INDEX TECHNICAL ACCESSORIES
COLLETS / SLEEVES
STRAIGHT SHANK
110
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.