Tooling Systems

CV 40 Shank Tools
KM Modular Adapters
KM SYSTEM
For KM adapters.
Through-the-toolholder coolant capability
— form AD or form B.
5/8" - 11 UNC drawbar thread.
HSK SYSTEM
KM-CV form B/AD
order number catalog number system size D2 D21 L1 L2 lbs.
KM spare
part pkg
wrench sizeactuation
screw ft.lbs
2992433 CV40BKM32157 KM32 1.26 1.75 1.58 .14 2.19 KM32PKG3L 5 MM 6-8
2992434 CV40BKM32354 KM32 1.26 1.75 3.54 2.01 2.86 KM32PKG3S 5 MM 6-8
2992435 CV40BKM40157 KM40 1.58 1.75 1.58 .12 2.12 KM40PKG3L 6 MM 9-12
2992436 CV40BKM40394 KM40 1.58 1.75 3.94 2.53 3.40 KM40PKG3S 6 MM 9-12
2992437 CV40BKM50354 KM50 1.97 — 3.54 — 3.59 KM50PKG3S 10 MM 20-25
2992438 CV40BKM50472 KM50 1.97 — 4.72 — 4.59 KM50PKG3S 10 MM 20-25
IMPORTANT: Do not overtorque actuation screw. Use torque recommendations above.
Supplied with KM actuation mechanism.
For retention knobs, see page 764.
BT SYSTEM
CV SYSTEM
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
DV SYSTEM
HSK Modular Adapters
QC / R8 SYSTEMS
For HSK adapters to DIN 69893-1 form A
or form C (coolant pipe needs to be
removed).
5/8" - 11 UNC drawbar thread.
Through-the-toolholder coolant capability
— form AD or form B.
HSK-CV form B/AD
order number catalog number system size D2 L1 lbs.
wrench sizeactuation
screw
ft.lbs
1533056 CV40BHSK50256 HSK50 2.17 2.56 2.20 4 MM 11
1533057 CV40BHSK63295 HSK63 2.76 2.95 2.65 5 MM 15
IMPORTANT: Do not overtorque actuation screw. Use torque recommendations above.
Supplied with actuation mechanism and sealing ring.
For retention knobs, see page 764.
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
STRAIGHT SHANK
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 529