Tooling Systems

KM SYSTEM
HSK SYSTEM
BT SYSTEM
BT 40 Shank Tools
TG Single-Angle Collet Chucks
Tremendous Grip (3:1 advantage).
Balanced-by-design.
Through-the-toolholder coolant capability
— form AD.
Collet Capacity
mm
inch
TG Collet Series min. max. min. max.
TG75 2,6 20,0 3/64 3/4
TG100 2,6 25,5 5/64 1
TG150 11,6 40,0 23/64 1 1/2
TG Round — BT form AD — Round Nut
COLLETS / SLEEVES STRAIGHT SHANK QC / R8 SYSTEMS DV SYSTEM
CV SYSTEM
Spare Parts
order number catalog number collet series D11 L1 L9 V kg
1156366 BT40TG075070M TG75 50 70 54 27 1,24
1156367 BT40TG100080M TG100 60 80 70 13 1,44
1191754 BT40TG100100M TG100 60 100 70 33 1,63
1191755 BT40TG100150M TG100 60 150 70 83 2,11
1191756 BT40TG150110M TG150 85 110 86 20 2,46
catalog number
locknut
locknut
wrench Nm stop screw
wrench sizestop
screw
BT40TG075070M LNA075M HSW45M 136 SS081041G 4 MM & 5/32
BT40TG100080M LNA100M HSW58M 203 SS112041G 4 MM & 5/32
BT40TG100100M LNA100M HSW58M 203 SS112041G 4 MM & 5/32
BT40TG100150M LNA100M HSW58M 203 SS112041G 4 MM & 5/32
BT40TG150110M LNA150M HSW80M 271 SS112041G 4 MM & 5/32
Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque.
Collet chuck technical section, see page 816.
Supplied with locknut and stop screw.
Locknut wrench must be ordered separately.
Interchangeable locknuts, coolant-style locknuts, and coolant discs are available and must be ordered separately; see page 746.
Stop screw coolant caps are available and must be ordered separately; see page 757.
Balanceable/Interchangeable locknuts are available and must be ordered separately; see page 740.
TG standard straight-bore collets, see page 657.
TG tap collets, see page 657.
For retention knobs, see page 764.
INDEX TECHNICAL ACCESSORIES
460
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.