Tooling Systems

KM SYSTEM
HSK SYSTEM
BT SYSTEM
Collets and Sleeves
TG75 Single Angle — HP High-Performance Coolant — Collets
Rubber-filled slots seal collet for coolant-fed tool
applications up to 103 bar (1,500 psi).
Twice as accurate as the standard TG and Class 2
ER-style collets.
Can be used in all standard TG collet chucks.
Provides "Tremendous Grip" (3:1 advantage) and
accuracy for all drilling applications.
Industry-standard Erickson single-angle collet
system.
0,13mm (.005") range of collapse.
Grips on back taper and margin of drill for
maximum feed rates and more accurate holes.
Manufactured to DIN6499 Class 1 accuracy, see
page 819.
CV SYSTEM
DV SYSTEM
QC / R8 SYSTEMS
STRAIGHT SHANK
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
TG75 HP Coolant Collet — Metric
D1 order number catalog number collet series
collet capacity
max. mm
collet capacity
min. mm
L9
6,0 1086665 75TGCHP060M TG75 6,00 5,87 22,8
8,0 1086666 75TGCHP080M TG75 8,00 7,87 25,9
10,0 1086667 75TGCHP100M TG75 10,00 9,87 38,7
12,0 1086674 75TGCHP120M TG75 12,00 11,87 39,3
14,0 1086675 75TGCHP140M TG75 14,00 13,87 39,9
16,0 1086676 75TGCHP160M TG75 16,00 15,87 40,5
18,0 1086677 75TGCHP180M TG75 18,00 17,87 41,1
20,0 1086678 75TGCHP200M TG75 20,00 19,87 46,8
TG75 HP Coolant Collet — Inch
D1 order number catalog number collet series
collet capacity
max. inch
collet capacity
min. inch
L9
1/4 1086603 75TGCHP0250 TG75 .2500 .2450 1.000
3/8 1086573 75TGCHP0375 TG75 .3750 .3700 1.038
7/16 1086654 75TGCHP0438 TG75 .4375 .4325 1.537
1/2 1086655 75TGCHP0500 TG75 .5000 .4950 1.556
9/16 1086656 75TGCHP0562 TG75 .5625 .5575 1.575
5/8 1086657 75TGCHP0625 TG75 .6250 .6200 1.594
11/16 1606109 75TGCHP0688 TG75 .6875 .6825 1.612
3/4 1086659 75TGCHP0750 TG75 .7500 .7450 1.843
IMPORTANT: Inserting the cutting tool less than 2/3 of the gripping length into the collet can influence the coolant sealing performance and damage
the collet permanently.
Full length of the gripping bore needs to be maintained to achieve maximum accuracy and safety.
Collet accuracies are based on size-for-size conditions. Using the collapsible range can influence the accuracy and gripping powers.
Never try to stretch the collets by clamping oversize cutting tools.
670
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.