Tooling Systems

KM SYSTEM
HSK SYSTEM
BT SYSTEM
Collets and Sleeves
TG50 Single-Angle — HP High-Performance Coolant — Collets
Rubber-filled slots seal collet for coolant-fed tool applications
up to 103 bar (1,500 psi).
Twice as accurate as the standard TG and Class 2 ER-style
collets.
Can be used in all standard TG collet chucks.
Provides "Tremendous Grip" (3:1 advantage) and accuracy for
all drilling applications.
Industry-standard Erickson single-angle collet system.
0,13mm (.005") range of collapse.
Grips on back taper and margin of drill for maximum feed
rates and more accurate holes.
Manufactured to DIN6499 Class 1 accuracy, see page 819 .
COLLETS / SLEEVES STRAIGHT SHANK QC / R8 SYSTEMS DV SYSTEM
CV SYSTEM
TG50 HP Coolant Collet — Metric
D1 order number catalog number collet series
collet capacity
max. mm
collet capacity
min. mm
L9
6,0 1086599 50TGCHP060M TG50 5,90 5,87 22,4
8,0 1086600 50TGCHP080M TG50 7,90 7,87 23,0
10,0 1086601 50TGCHP100M TG50 9,90 9,87 30,0
12,0 1086602 50TGCHP120M TG50 11,90 11,87 30,6
TG50 HP Coolant Collet — Inch
D1 order number catalog number collet series
CCCX capacity
max. mm
CCCN capacity
min. mm
L9
1/8 1086595 50TGCHP0125 TG50 .1250 .1200 .847
3/16 1086569 50TGCHP0188 TG50 .1875 .1825 .866
1/4 1086570 50TGCHP0250 TG50 .2500 .2450 .885
5/16 1086571 50TGCHP0312 TG50 .3125 .3075 .904
3/8 1086596 50TGCHP0375 TG50 .3750 .3700 .922
7/16 1086597 50TGCHP0438 TG50 .4375 .4325 1.196
1/2 1086598 50TGCHP0500 TG50 .5000 .4950 1.215
IMPORTANT: Inserting the cutting tool less than 2/3 of the gripping length into the collet can influence the coolant sealing performance and
permanently damage the collet.
Full length of the gripping bore must be maintained to achieve maximum accuracy and safety.
Collet accuracies are based on size-for-size conditions. Using the collapsible range can influence the accuracy and gripping powers.
Never try to stretch the collets by clamping oversize cutting tools.
INDEX TECHNICAL ACCESSORIES
662
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.