Tooling Systems

Tremendous Grip (3:1 advantage).
Balanced-by-design.
1" - 8 UNC draw bar thread.
Through-the-toolholder coolant
capability.
Collet Capacity
mm
inch
TG Collet Series min. max. min. max.
TG100 2,6 25,5 5/64 1
TG150 11,6 40,0 23/64 1 1/2
QC 50 Shank Tools
TG Single-Angle Collet Chucks
KM SYSTEM
HSK SYSTEM
BT SYSTEM
TG-QC form AD — Inch Drawbar
order number catalog number collet series D11 L1 L9 V lbs.
1025798 QC50TG100272 TG100 2.50 2.72 2.94 2.06 7.10
1013526 QC50TG150284 TG150 3.48 2.84 3.25 1.37 7.19
Spare Parts
catalog number
locknut
locknut
wrench ft.lbs stop screw
wrench sizestop
screw
QC50TG100272 NPA100 OEW225 150 SS112041G 4 MM & 5/32
QC50TG150284 NPA150 PSW350 200 SS162062G 4 MM & 5/32
Collet must be loaded into locknut first. Before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque.
Collet chuck technical section, see page 816.
Supplied with locknut and stop screw.
Locknut wrench must be ordered separately.
Interchangeable locknuts, coolant-style locknuts, and coolant discs are available and must be ordered separately; see page 746.
Stop screw coolant caps are available and must be ordered separately; see page 757.
Balanceable/Interchangeable locknuts are available and must be ordered separately; see page 740.
TG standard straight-bore collets, see page 657.
TG tap collets, see page 657.
STRAIGHT SHANK QC / R8 SYSTEMS DV SYSTEM CV SYSTEM
INDEX TECHNICAL ACCESSORIES
COLLETS /
SLEEVES
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 613