Tooling Systems

ModBORE Boring Systems
Fine Boring Single Cutters
.0004" (0,01mm) diameter adjustment.
Insert holder included.
KM SYSTEM
CV SYSTEM
DV SYSTEM
QC / R8 SYSTEMS
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
STRAIGHT SHANK
BT SYSTEM
HSK SYSTEM
FBHS — 0° Lead
BR1 bore range L1 D2 spare
order number catalog number mm inch mm inch mm inch cartridge 1 parts pkg.
1132011 KM50FBHS5190 51,000-67,000 2.0079-2.6378 90 3.543 42 1.65 R51FBHS06 PKG4202
1133301 KM50FBHS67100 67,000-87,000 2.6378-3.4252 100 3.937 55 2.17 R67FBHS09 PKG5502
1131952 KM50FBHS87120 87,000-116,000 3.4252-4.5669 120 4.724 72 2.84 R67FBHS09 PKG7202
Blade R51-FBHS-06 gage insert is CC..T21.51.
Blade R67-FBHS-09 gage insert is CC..T32.52.
ModBORE technical section, see page 820.
.0004" (0,01mm) diameter adjustment.
Boring bar not included.
FBHO
CSMS L1 D1 D2 spare wrench size- wrench sizeorder
number catalog number system size mm inch mm inch mm inch parts pkg. clamp screw adjusting screw
1132036 KM50FBHO1670 KM50 70 2.756 16 .630 55 2.17 PKG7001 5.0 MM 5.0 MM
NOTE: Dial graduations equal .0002" (0,005mm) movement of the tool tip, which changes cutting diameter by .0004" (,0.01mm).
Boring bars and sleeves are located on page 190.
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 251