Tooling Systems

Through-the-toolholder coolant capability
— form B and AD.
1" - 8 UNC drawbar thread.
CV 50 Shank Tools
Straight Shank Adapters for Drills with Flats
KM SYSTEM
SSF-CV form B/AD
HSK SYSTEM
order number catalog number D1 D2 L1 L9 lbs. clamp screw
wrench sizeclamp
screw ft.lbs
1749472 CV50BSSF075275 3/4 1.75 2.75 2.25 7.22 ELS062050PKG 5/16 70
1749473 CV50BSSF100400 1 2.00 4.00 3.25 8.06 DWG ELS075050 3/8 110
1749474 CV50BSSF125400 1 1/4 2.50 4.00 3.50 8.87 ELS075056PKG 3/8 110
1749475 CV50BSSF150450 1 1/2 2.75 4.50 4.00 9.68 ELS075056PKG 3/8 110
1749209 CV50BSSF200550 2 3.75 5.50 4.25 15.20 ELS100088PKG 1/2 150
IMPORTANT: Do not overtighten clamp screw; use torque recommendations above.
Supplied with clamp screws.
Clamp screw wrench not included.
For retention knobs, see page 764.
BT SYSTEM
CV SYSTEM
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
DV SYSTEM
Tap Chuck Adapter — Whistle Notch Style — Short
QC / R8 SYSTEMS
Through-the-toolholder coolant capability
— form AD.
1" - 8 UNC drawbar thread.
Suitable for Whistle Notch straight shankstyle
tap chucks.
STRAIGHT SHANK
TA-CV form AD
order number catalog number D1 D2 L1 L9 lbs. clamp screw
wrench sizeclamp
screw ft.lbs
1064539 CV50TA1137 1.00 2.75 1.38 3.63 6.53 ELS062050PKG 5/16 70
1017996 CV50TA15200 1.50 2.75 2.00 3.80 6.38 ELS050050PKG 1/4 60
IMPORTANT: Do not overtighten clamp screw; use torque recommendations above.
Supplied with clamp screw.
Clamp screw wrench not included.
For retention knobs, see page 764.
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 551