Tooling Systems

For KM adapters.
Through-the-toolholder coolant capability
— form AD or form B.
DV 40 Shank Tools
KM Modular Adapters
KM SYSTEM
KM-DV form B/AD
HSK SYSTEM
order number catalog number system size D2 D21 L1 L2 kg
KM spare
part pkg
wrench sizeactuation
screw Nm
1974735 DV40BKM32040M KM32 32 44 40 3 0,97 KM32PKG3L 5 MM 8-11
1974736 DV40BKM32090M KM32 32 44 90 51 1,23 KM32PKG3S 5 MM 8-11
1974737 DV40BKM40040M KM40 40 44 40 3 0,95 KM40PKG3L 6 MM 12-16
1974738 DV40BKM40100M KM40 40 44 100 63 1,49 KM40PKG3S 6 MM 12-16
1974739 DV40BKM50060M KM50 50 — 60 40 1,22 KM50PKG3S 10 MM 27-34
1974740 DV40BKM50120M KM50 50 — 120 100 2,07 KM50PKG3S 10 MM 27-34
IMPORTANT: Do not overtorque actuation screw; use torque recommendations above.
Supplied with KM actuation mechanism.
For retention knobs, see page 764.
BT SYSTEM
CV SYSTEM
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
DV SYSTEM
For HSK adapters to DIN 69893-1 form A
or form C (coolant pipe needs to be
removed).
Through-the-toolholder coolant capability
— form AD or form B.
HSK-DV form B/AD
HSK Modular Adapters
QC / R8 SYSTEMS
STRAIGHT SHANK
order number catalog number system size D2 L1 kg
wrench sizeactuation
screw
Nm
1519664 DV40BHSK32055M HSK32 37 55 0,90 3 MM 6
1519665 DV40BHSK40060M HSK40 45 60 1,00 3 MM 8
1519668 DV40BHSK50065M HSK50 55 65 1,00 4 MM 15
1320683 DV40BHSK63075M HSK63 70 75 1,20 5 MM 20
IMPORTANT: Do not overtorque actuation screw; use torque recommendations above.
Supplied with actuation mechanism and sealing ring.
For retention knobs, see page 764.
Toolholders are factory set to the
form B coolant supply position.
When relocating coolant position
screws, use of a removable liquid
(small screw thread locker)
is recommended.
The toolholder can be easily converted
to DIN 69871 form AD coolant supply;
tightening screws will stop coolant
from escaping through the flange.
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 581