Tooling Systems

KM SYSTEM
HSK SYSTEM
BT SYSTEM
Collets and Sleeves
3/4" HC Hydraulic Chuck Sleeves
One-piece design with slot configuration to
seal coolant.
Cutting tool must be cylindrical and have a
through hole when using coolant.
Capable of up to 120 bar (1,500 psi) coolant
pressure.
Sleeve must be inserted completely into the
hydraulic chuck until shoulder mates against
the hydraulic chuck front face.
Cutting tools must be in full contact of the
sleeve bore length (L9).
Cutting tool shank requirement tolerance is
h6 and Ra ≥ 0,3 µm (12 µ in) surface finish.
Metric and inch bores are available.
CV SYSTEM
DV SYSTEM
QC / R8 SYSTEMS
STRAIGHT SHANK
COLLETS / SLEEVES
INDEX TECHNICAL ACCESSORIES
HC750 Sleeve — Metric
(3/4" sleeve with metric bore)
D1 order number catalog number
sleeve
series
sleeve capacity
max. mm
sleeve capacity
min. mm
L9
3,0 2248995 75HC030M HC750 3,000 2,994 28
4,0 2248996 75HC040M HC750 4,000 3,992 28
5,0 2248997 75HC050M HC750 5,000 4,992 28
6,0 1093271 75HC060M HC750 6,000 5,992 36
8,0 1093272 75HC080M HC750 8,000 7,991 37
10,0 1093273 75HC100M HC750 10,000 9,991 40
12,0 1093524 75HC120M HC750 12,000 11,989 45
14,0 1093525 75HC140M HC750 14,000 13,989 45
16,0 1093526 75HC160M HC750 16,000 15,989 48
HC750 Sleeve — Inch
(3/4" sleeve with inch bore)
D1 order number catalog number
sleeve
series
sleeve capacity
max. inch
sleeve capacity
min. inch
L9
1/8 1937870 75HC0125 HC750 .1250 .1247 1.46
3/16 1093496 75HC0188 HC750 .1875 .1872 1.46
1/4 1093497 75HC0250 HC750 .2500 .2496 1.81
5/16 1093498 75HC0312 HC750 .3125 .3121 1.93
3/8 1093500 75HC0375 HC750 .3750 .3746 1.93
7/16 1093501 75HC0438 HC750 .4375 .4371 1.93
1/2 1093268 75HC0500 HC750 .5000 .4996 2.13
9/16 1093269 75HC0562 HC750 .5625 .5621 2.13
5/8 1093270 75HC0625 HC750 .6250 .6246 2.13
IMPORTANT: Inserting the cutting tool less than the full gripping length (L9) of the sleeve can permanently damage the sleeve and hydraulic chuck.
Full length of the gripping bore must be maintained to achieve maximum accuracy, safety, and coolant sealing feature.
648
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.