Tooling Systems

More documents

Recommendations

Info

Introducing the tooling program as versatile as your shop... …specifically designed to enable you to grow business, increase profitability, and reduce everyday production worries! VERSATILITY — only 6 grades needed for virtually all your machining requirements! QUALITY — from the world’s premier tooling solutions supplier! VALUE — decrease your inventory costs by up to 50%! HOLEMAKING • Indexable Insert Drill, QPV Spade Blade, Solid Carbide Drill • New Insert Grade: KU40D MILLING • KSSM Face Mills, End Mills • New Insert Grades: KUC20M, KUC30M LATHE • New Insert Grades: KU10T, KU25T, KU30T • A4 Turn & Groove System TOOLING SYSTEMS • Steep Taper <strong>Tooling</strong> • KM25 • KM3225 For your FREE copy of our KENNA UNIVERSAL catalog, visit www.kennametal.com. 650 THINK TOOLING SYSTEMS, THINK KENNAMETAL.
One-piece design. Cutting tool must be cylindrical and have a through hole when using coolant. Cutting tool shank requirement tolerance is h6 and Ra ≥ 0,3 µm (12 µ in) surface finish. Maximum collapse is h6. SMC - Milling chuck sleeves Milling - Drilling KM SYSTEM HSK SYSTEM 20 = 20mm 25 = 25mm 32 = 32mm 75 = 3/4" 10 = 1" 12 = 1 1/4" metric 010 = 1mm (xx.x) 160 = 16mm 245 = 24,5mm inch 0125 = 1/8" (x.xxx) 0500 = 1/2" 1000 = 1" BT SYSTEM System Size Sleeve Bore Size 20 SMC 120 M Sleeve Style Identification Value CV SYSTEM DV SYSTEM SMC = Milling chuck M = sleeve bore is built to metric value (blank) = sleeve bore is built to inch valiue QC / R8 SYSTEMS INDEX TECHNICAL ACCESSORIES COLLETS / SLEEVES STRAIGHT SHANK To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. 651
Page 1 and 2:
GTOOLINGTOOL TOOLINGSYSTE TEMSSYSTE
Page 3 and 4:
WWW.KENNAMETAL.COM MSTOOLINGSYSTEM
Page 5 and 6:
Kennametal is a world leader in the
Page 7 and 8:
YSTEMSTOOLINGSYST NGSYSTEMSTOOLING
Page 9 and 10:
WWW.KENNAMETAL.COM STOOLING LINGSYS
Page 11 and 12:
Toolholder Selection System KM Groo
Page 13 and 14:
Toolholder Selection System Drillin
Page 15 and 16:
Toolholder Selection System Milling
Page 17 and 18:
KM ® TABLE OF CONTENTS KM Overview
Page 19 and 20:
KM Tooling System Overview The Kenn
Page 21 and 22:
KM Cutting Units Identification Sys
Page 23 and 24:
KM Integral Steel and Carbide Shank
Page 25 and 26:
PRESENTING Kennametal Complete —
Page 27 and 28:
KM Integral Steel and Carbide Shank
Page 29 and 30:
KM Rotating Tools Identification Sy
Page 31 and 32:
KM-LOC Clamping Units Lathe INDEX T
Page 33 and 34:
KM-LOC Clamping Units Lathe INDEX T
Page 35 and 36:
KM-LOC II Clamping Units Lathe HSK
Page 37 and 38:
KM-LOC II Clamping Units Lathe STRA
Page 39 and 40:
KM-LOC II Clamping Units Lathe INDE
Page 41 and 42:
KM Manual Clamping Units Lathe INDE
Page 43 and 44:
KM Manual Clamping Units Lathe KM S
Page 45 and 46:
KM Manual Clamping Units Lathe KM S
Page 47 and 48:
KM Manual Clamping Units Lathe L21
Page 49 and 50:
KM Automatic Clamping Units Lathe K
Page 51 and 52:
Introducing the tooling program as
Page 53 and 54:
Operating Instructions for KM25 and
Page 55 and 56:
KM25 Cutting Units Kenloc COLLETS /
Page 57 and 58:
Page 59 and 60:
KM25 Cutting Units Kenloc DV SYSTEM
Page 61 and 62:
KM25 Cutting Units Screw-On Inserts
Page 63 and 64:
Page 65 and 66:
KM25 Cutting Units TOP NOTCH Thread
Page 67 and 68:
KM25 Cutting Units A4 Groove & Turn
Page 69 and 70:
KM25 Cutting Units A3 Cut-Off INDEX
Page 71 and 72:
KM25 Cutting Units A2 Modular Blade
Page 73 and 74:
KM25 Adapters Accessories INDEX TEC
Page 75 and 76:
KM3225 Clamping Units Lathe KM SYST
Page 77 and 78:
KM3225 Cutting Units Kenloc INDEX T
Page 79 and 80:
KM3225 Cutting Units Kenloc STRAIGH
Page 81 and 82:
KM3225 Cutting Units Kenloc STRAIGH
Page 83 and 84:
KM3225 Cutting Units TOP NOTCH Groo
Page 85 and 86:
KM3225 Cutting Units A3 Deep Groovi
Page 87 and 88:
KM3225 Adapters BA — Boring Bar A
Page 89 and 90:
KM32 Cutting Units Kenloc DV SYSTEM
Page 91 and 92:
Page 93 and 94:
KM32 Cutting Units P-Clamping DV SY
Page 95 and 96:
Page 97 and 98:
KM32 Cutting Units TOP NOTCH Profil
Page 99 and 100:
Page 101 and 102:
KM32 Cutting Units Kendex Cut-Off K
Page 103 and 104:
KM32 Internal Cutting Units P-Clamp
Page 105 and 106:
KM32 Internal Steel Cutting Units S
Page 107 and 108:
KM32 Internal Steel Cutting Units T
Page 109 and 110:
KM32 Adapters Boring Bar Adapters I
Page 111 and 112:
KM32 Adapters Boring Bar Adapters K
Page 113 and 114:
KM32 Collet Chucks ER — Single-An
Page 115 and 116:
• Through-the-toolholder coolant
Page 117 and 118:
KM32 Shank Tools Jacobs Taper Adapt
Page 119 and 120:
ModBORE Boring Systems Rough Boring
Page 121 and 122:
KM40 Cutting Units Kenclamp STRAIGH
Page 123 and 124:
Page 125 and 126:
KM40 Cutting Units Kenclamp QC / R8
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
KM40 Cutting Units P-Clamping COLLE
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
KM40 Cutting Units Wheel Turning HS
Page 149 and 150:
Page 151 and 152:
KM40 Cutting Units A3/A4 Modular De
Page 153 and 154:
A4 Modular Blades A4M-M — Straigh
Page 155 and 156:
A4 Groove & Turn Modular Blades A4M
Page 157 and 158:
A3 Deep-Grooving Modular Blades A3M
Page 159 and 160:
KM40 Cutting Units A2 Cut-Off Block
Page 161 and 162:
KM40 Internal Cutting Units Kenloc
Page 163 and 164:
Page 165 and 166:
KM40 Internal Cutting Units P-Clamp
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
KM40 Internal Carbide Cutting Units
Page 173 and 174:
KM40 Internal Cutting Units TOP NOT
Page 175 and 176:
KM40 Internal Steel Cutting Units T
Page 177 and 178:
KM40 Internal Cutting Units LT Thre
Page 179 and 180:
Balanced by design. Manufactured r
Page 181 and 182:
KM40 Shank Tools ER — Single-Angl
Page 183 and 184:
KM40 Shank Tools Drill Chucks KM SY
Page 185 and 186:
KM40 Shank Tools SM — Shell Mill
Page 187 and 188:
KM40 DFR DRILL-FIX Drills DFR — 2
Page 189 and 190:
KM40 DFT DRILL-FIX Drills DFT — 2
Page 191 and 192:
KM40 ModBORE Boring Systems Rough B
Page 193 and 194:
KM40 Adapters STRAIGHT SHANK HSK SY
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
KM50 Cutting Units Kenclamp QC / R8
Page 201 and 202:
KM50 Cutting Units Kenclamp INDEX T
Page 203 and 204:
KM50 Cutting Units Kenloc BT SYSTEM
Page 205 and 206:
KM50 Cutting Units Kenloc BT SYSTEM
Page 207 and 208:
Page 209 and 210:
KM50 Cutting Units Kenloc INDEX TEC
Page 211 and 212:
Page 213 and 214:
KM50 Cutting Units P-Clamping INDEX
Page 215 and 216:
Page 217 and 218:
KM50 Cutting Units Kendex TNT Ceram
Page 219 and 220:
KM50 Cutting Units Kendex TNT Ceram
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
KM50 Cutting Units A3/A4 Modular De
Page 227 and 228:
Metalcutting Education Premier sour
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
KM50 Internal Carbide Cutting Units
Page 237 and 238:
KM50 Internal Cutting Units TOP NOT
Page 239 and 240:
KM50 Internal Cutting Units LT Thre
Page 241 and 242:
Balanced by design. Manufactured r
Page 243 and 244:
KM50 Shank Tools ER — Single-Angl
Page 245 and 246:
KM50 Shank Tools Drill Chucks KM SY
Page 247 and 248:
KM50 Shank Tools SM — Shell Mill
Page 249 and 250:
KM50 DFR DRILL-FIX Drills DFR — 3
Page 251 and 252:
KM50 DFT DRILL-FIX Drills DFT — 3
Page 253 and 254:
ModBORE Boring Systems Fine Boring
Page 255 and 256:
KM63UT Multi-Tasking INDEX TECHNICA
Page 257 and 258:
KM63UT Cutting Units Kenclamp STRAI
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
KM63UT Cutting Units Kenclamp INDEX
Page 265 and 266:
KM63UT Cutting Units Kenloc DV SYST
Page 267 and 268:
KM63UT Cutting Units Kenloc COLLETS
Page 269 and 270:
KM63UT Cutting Units Kenloc COLLETS
Page 271 and 272:
KM63UT Cutting Units P-Clamping BT
Page 273 and 274:
KM63UT Cutting Units P-Clamping STR
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
KM63UT Cutting Units P-Clamping IND
Page 283 and 284:
KM63UT Cutting Units Screw-On Inser
Page 285 and 286:
KM63UT Cutting Units Kendex Negativ
Page 287 and 288:
KM63UT Cutting Units TOP NOTCH Prof
Page 289 and 290:
KM63UT Cutting Units TOP NOTCH Thre
Page 291 and 292:
KM63UT Cutting Units On-Edge Thread
Page 293 and 294:
KM63UT Cutting Units A2 Cut-Off Blo
Page 295 and 296:
KM63UT Internal Cutting Units Kenlo
Page 297 and 298:
KM63UT Internal Cutting Units P-Cla
Page 299 and 300:
KM63UT Internal Cutting Units P-Cla
Page 301 and 302:
KM63UT Internal Steel Cutting Units
Page 303 and 304:
Pre-balanced G2.5 @ 15,000 rpm. Ma
Page 305 and 306:
Slim design. Pre-balanced G6.3 @ 1
Page 307 and 308:
• Tremendous Grip (3:1 advantage)
Page 309 and 310:
Through-the-toolholder coolant capa
Page 311 and 312:
KM63UT Shank Tools SM — Shell Mil
Page 313 and 314:
ModBORE Boring Systems Rough Boring
Page 315 and 316:
KM63UT Adapters COLLETS / SLEEVES S
Page 317 and 318:
KM63XMZ Multi-Tasking BT SYSTEM CV
Page 319 and 320:
KM63XMZ Multi-Tasking KM63XMZ — S
Page 321 and 322:
KM63XMZ Mazak Multi-Tasking INDEX T
Page 323 and 324:
KM63XMZ Cutting Units P-Clamping IN
Page 325 and 326:
KM63XMZ Cutting Units A2 Cut-Off Bl
Page 327 and 328:
KM63XMZ Adapters BA — Boring Bar
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Grip (2:1 advantage). Balanced-by-
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
KM63XMZ Shank Tools CS — Combi-Ty
Page 341 and 342:
KM63XMZ Adapters Romicron Adapters
Page 343 and 344:
KM80ATC Multi-Tasking KM80ATC — S
Page 345 and 346:
KM80ATC Cutting Units Kenclamp STRA
Page 347 and 348:
KM80ATC Cutting Units Kenloc COLLET
Page 349 and 350:
KM80ATC Cutting Units TOP NOTCH Thr
Page 351 and 352:
KM80ATC Shank Tools Boring Bar Adap
Page 353 and 354:
KM80ATC Shank Tools TG — Single-A
Page 355 and 356:
KM80ATC Adapters Straight Shank Ada
Page 357 and 358:
KM80ATC Adapters INDEX TECHNICAL AC
Page 359 and 360:
HSK TABLE OF CONTENTS HSK40A.......
Page 361 and 362:
HSK Shank Tools DIN 69893 part 1, f
Page 363 and 364:
HSK 40A Shank Tools Hydraulic Chuck
Page 365 and 366:
Tremendous Grip (3:1 advantage). B
Page 367 and 368:
Balanced-by-design. Through-the-to
Page 369 and 370:
HSK 40A Shank Tools Bar Blank Mach
Page 371 and 372:
Grip (2:1 advantage). Snap-in lock
Page 373 and 374:
Pre-balanced G2.5 @ 15,000 rpm. Ru
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Heavy and fine milling capabilities
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
No through-the-toolholder coolant c
Page 389 and 390:
HSK 63A Shank Tools HSK Modular Ada
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Page 399 and 400:
HSK 100A Shank Tools Shrink Fit Too
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
For HSK adapters to DIN 69893-1 for
Page 415 and 416:
HSK Shank Tools - form C DIN 69893
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
HSK 40C Shank Tools Bar Blank Mach
Page 423 and 424:
Hydraulic Chucks — Standard Line
Page 425 and 426:
Page 427 and 428:
Page 429 and 430:
HSK Shank Tools - Form E DIN 69893
Page 431 and 432:
Chucks ≤ ø 12mm (≤ ø 1/2") ar
Page 433 and 434:
Page 435 and 436:
HSK Shank Tools DIN 69893 part 1, f
Page 437 and 438:
Pre-balanced G2.5 @ 15,000 rpm. Th
Page 439 and 440:
HSK 80F (Pin) Shank Tools ER Single
Page 441 and 442:
BT TABLE OF CONTENTS BT30..........
Page 443 and 444:
BT Shank Tools Meets or exceeds JI
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Grip 1:1. Balanced-by-design. Thr
Page 451 and 452:
Page 453 and 454:
For KM adapters. Through-the-toolh
Page 455 and 456:
TT-BT form B/AD — Inch (continued
Page 457 and 458:
BT 40 Shank Tools Hydraulic Chucks
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Grip (2:1 advantage). Pre-balanced
Page 465 and 466:
BT 40 Shank Tools ER Single-Angle C
Page 467 and 468:
Page 469 and 470:
Page 471 and 472:
BT 40 Shank Tools Shell Mill Adapte
Page 473 and 474:
Page 475 and 476:
BT 40 Shank Tools Morse Taper Adapt
Page 477 and 478:
Page 479 and 480:
Page 481 and 482:
Page 483 and 484:
Page 485 and 486:
Balanced-by-design. Runout ≤0,00
Page 487 and 488:
Page 489 and 490:
Grip (2:1 advantage). Balanced-by-
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Custom Tooling Systems Solutions Wh
Page 505 and 506:
CV TABLE OF CONTENTS CV40 - forms B
Page 507 and 508:
CV Shank Tools Kennametal's "balan
Page 509 and 510:
TT-CV form B/AD — Inch Cutting To
Page 511 and 512:
HC Slim-CV form B/AD — Metric (co
Page 513 and 514:
CV 40 Shank Tools Hydraulic Chucks
Page 515 and 516:
CV 40 Shank Tools Milling Chucks
Page 517 and 518:
Page 519 and 520:
CV 40 Shank Tools ER Short Single-A
Page 521 and 522:
CV 40 Shank Tools ER Single-Angle C
Page 523 and 524:
Balanced-by-design. 5/8" - 11 UNC
Page 525 and 526:
Page 527 and 528:
Balanced-by-design. 5/8" - 11 UNC
Page 529 and 530:
CV 40 Shank Tools Tap Chucks — RC
Page 531 and 532:
CV 40 Shank Tools KM Modular Adapte
Page 533 and 534:
CV 50 Shank Tools Shrink Fit Toolho
Page 535 and 536:
CV 50 Shank Tools Hydraulic Chucks
Page 537 and 538:
Pre-balanced G6.3 @ 15,000 rpm. 1"
Page 539 and 540:
Balanced-by-design. 1" - 8 UNC dra
Page 541 and 542:
CV 50 Shank Tools TG Flush Face Sin
Page 543 and 544:
Tremendous Grip (3:1 advantage) Ba
Page 545 and 546:
CV 50 Shank Tools ER Short Single-A
Page 547 and 548:
CV 50 Shank Tools ER Single-Angle C
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
CV 50 Shank Tools Morse Taper Adapt
Page 559 and 560:
CV 50 Shank Tools KM Modular Adapte
Page 561 and 562:
Precision Deburring • Superior Po
Page 563 and 564:
DV TABLE OF CONTENTS DV40 - forms B
Page 565 and 566:
DV Shank Tools Meets or exceeds DI
Page 567 and 568:
DV 40 Shank Tools Hydraulic Chucks
Page 569 and 570:
Page 571 and 572:
Tremendous Grip (3:1 advantage). Ba
Page 573 and 574:
Grip (2:1 advantage). Through-the-
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
DV 50 Shank Tools Hydraulic Chucks
Page 589 and 590:
Balanced-by-design. Runout ≤0,00
Page 591 and 592:
Page 593 and 594:
DV 50 Shank Tools ER Single-Angle C
Page 595 and 596:
Page 597 and 598:
Page 599 and 600:
Page 601 and 602: Rapid-change style. Tension and co
Page 603 and 604: For KM adapters. Through-the-toolh
Page 605 and 606: QC-R8 TABLE OF CONTENTS QC30.......
Page 607 and 608: Quick-change (QC) shank design is s
Page 609 and 610: Grip (1:1). Balanced-by-design. 1
Page 611 and 612: Tremendous Grip (3:1 advantage). B
Page 613 and 614: Balanced-by-design. 5/8" - 11 UNC
Page 615 and 616: Tremendous Grip (3:1 advantage). B
Page 617 and 618: No through-the-toolholder coolant c
Page 619 and 620: R8 Shank Tools Introduction KM SYST
Page 621 and 622: R8 Shank Tools Shell Mill Adapters
Page 623 and 624: Straight Shank TABLE OF CONTENTS Sh
Page 625 and 626: Straight-shank toolholder extension
Page 627 and 628: Tremendous Grip (3:1 advantage). A
Page 629 and 630: Grip (2:1 advantage). Balanced-by-
Page 631 and 632: General Engineering Kennametal enab
Page 633 and 634: Spare Parts (continued from previou
Page 635 and 636: DA-Style 04-SS — Inch Straight Sh
Page 637 and 638: Spare Parts (continued from previou
Page 639 and 640: Grip 1:1. Industry-standard Ericks
Page 641 and 642: Grip 1:1. Industry-standard Ericks
Page 643 and 644: Collets and Sleeves TABLE OF CONTEN
Page 645 and 646: HC - Hydraulic chuck sleeves Drilli
Page 647 and 648: Collets and Sleeves 20mm HC Hydraul
Page 649 and 650: One-piece design with slot configur
Page 651: One-piece design with slot configur
Page 655 and 656: Collets and Sleeves 3/4" SMC Millin
Page 657 and 658: Collets and Sleeves 1 1/4" SMC Mill
Page 659 and 660: Provides "Tremendous Grip" (3:1 adv
Page 661 and 662: TG50 Collet — Inch (continued fro
Page 663 and 664: Twice as accurate as the standard T
Page 665 and 666: Collets and Sleeves TG50 Single Ang
Page 669 and 670: An economical way to purchase a gro
Page 675 and 676: Collets and Sleeves TG75 Single Ang
Page 677 and 678: TG100 Collet — Inch (continued on
Page 679 and 680: Rubber-filled slots seal collet for
Page 685 and 686: Collets and Sleeves TG100 Single An
Page 687 and 688: TG150 Collet — Inch (continued fr
Page 689 and 690: An economical way to purchase a gro
Page 691 and 692: Automotive Kennametal enables leadi
Page 693 and 694: Provides approximately 2:1 grip adv
Page 695 and 696: Provides approximately 2:1 grip adv
Page 697 and 698: Collets and Sleeves ER16 Single Ang
Page 703 and 704:
Collets and Sleeves ER25 Single Ang
Page 705 and 706:
Page 707 and 708:
Page 709 and 710:
ER40 Collet — Inch (continued fro
Page 711 and 712:
Page 713 and 714:
Supply-Chain Services We deliver th
Page 715 and 716:
DA - Double Angle Collets Drilling
Page 717 and 718:
Provides 1:1 grip for most drilling
Page 719 and 720:
Provides 1:1 grip for most drilling
Page 721 and 722:
Rubber-filled slots seal collet for
Page 723 and 724:
DA100 Collet — Inch (continued fr
Page 725 and 726:
Page 727 and 728:
DA180 Collet — Inch (continued fr
Page 729 and 730:
Page 731 and 732:
Collets and Sleeves DA-J Series Dou
Page 733 and 734:
Collets and Sleeves DA-L Series Dou
Page 735 and 736:
Rapid-change style. Solid positive
Page 737 and 738:
Page 739 and 740:
Page 741 and 742:
Accessories TABLE OF CONTENTS Balan
Page 743 and 744:
Shrink Fit — Induction Coil Shrin
Page 745 and 746:
Accessories Shrink Fit — Axial Ad
Page 747 and 748:
Accessories Collet Extractor — TG
Page 749 and 750:
Balanceable and interchangeable loc
Page 751 and 752:
Standard and replaceable locknuts a
Page 753 and 754:
0,5mm (.020") range of sealing per
Page 755 and 756:
0,5mm (.020") range of sealing per
Page 757 and 758:
Accessories ER40 Coolant Locknut Se
Page 759 and 760:
Stop screw caps can easily be snapp
Page 761 and 762:
Universal vise to hold HSK forms A,
Page 763 and 764:
For acceptance testing on machine t
Page 765 and 766:
Accessories Spindle Wiper — 7/24
Page 767 and 768:
Metric thread. Piloted. Through-c
Page 769 and 770:
Metric thread. No pilot. Through-
Page 771 and 772:
Accessories Torque Wrench — KM Ma
Page 773 and 774:
Accessories Wrench — Pin Spanner
Page 775 and 776:
Technical Data TABLE OF CONTENTS KM
Page 777 and 778:
Manual Clamping System Characterist
Page 779 and 780:
Technical Information KM Tooling KM
Page 781 and 782:
Assembly/Disassembly Instructions A
Page 783 and 784:
KM Manual Standard KM Manual units
Page 785 and 786:
KM63XMZ Tool Orientation Specificat
Page 787 and 788:
The KM tooling joint is an extremel
Page 789 and 790:
Chart 3 0.45 0.4 0.35 0.3 0.25 doc
Page 791 and 792:
KM63 Technical Information KM Tooli
Page 793 and 794:
VDI Application Guide Technical Inf
Page 795 and 796:
KM LOC-II CL2NS/T-EF Flanges KM Ma
Page 797 and 798:
• KM LOC-II CL2NS/T-BC Technical
Page 799 and 800:
KM RACA and NACA Spring Pack Cylind
Page 801 and 802:
VDMA Technical Technical Informatio
Page 803 and 804:
Common general dimensions to help y
Page 805 and 806:
Balancing Kennametal offers a range
Page 807 and 808:
Technical Information Hydraulic Chu
Page 809 and 810:
Technical Information Hydraulic Chu
Page 811 and 812:
Technical Information Shrink Fit KM
Page 813 and 814:
Toolholders • Slim design • Bal
Page 815 and 816:
Technical Information HPMC Milling
Page 817 and 818:
Automotive Kennametal enables leadi
Page 819 and 820:
Technical Information Collet Series
Page 821 and 822:
Technical Information Collets .001"
Page 823 and 824:
1. KM Lockscrew 2. Adjustment Locks
Page 825 and 826:
Index By Order Number Order No Cata
Page 827 and 828:
Page 829 and 830:
Page 831 and 832:
Page 833 and 834:
Page 835 and 836:
Page 837 and 838:
Page 839 and 840:
Page 841 and 842:
Page 843 and 844:
Metalcutting Safety Metalcutting Sa
show all

Tooling Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?